K-0595: Difference between revisions
Line 45: | Line 45: | ||
|} | |} | ||
* Driver Install: | * Driver Install: | ||
** Method 1: | ** Method 1 (Recommended): | ||
0.96 inch OLED usage please refer to: [ https://wiki.52pi.com/index.php/S-0005 ] | 0.96 inch OLED usage please refer to: [ https://wiki.52pi.com/index.php/S-0005 ] | ||
After installing ssd1306 driver, you can refer to the example code to create your own python script to show system informations. | |||
** Method 2: | ** Method 2: | ||
* This method will refer to Adafruit python SSD1306 example for this display. | * This method will refer to Adafruit python SSD1306 example for this display. |
Revision as of 15:25, 1 September 2021
Mini Tower Kit
Descriptions
This is a 3D printed case kit compatible with Raspberry Pi 3B, 3B+, and 4B. The exquisite shape provides good support and protection. The laser-cut acrylic cover on the side allows you to observe the running state of the Raspberry Pi. ICE Tower Cooler can not only provide good heat dissipation, but also turn your Raspberry Pi into an exquisite desktop mini host. The top OLED opening is compatible with 0.96 inch OLED display, and can display the running status of the Raspberry Pi through simple programming, such as: CPU load, memory usage, disk utilization, network load, CPU temperature information, etc.
Features
- Easy to Install
- Pretty Outlook
- Compatible with Raspberry Pi 3B/3B+/4B
- 0.96 inch OLED Display
- Laser-cut Acrylic cover
- Compatible with both ice tower cooler and low-profile ice tower cooler.
- 3D printing case
Gallery
- Application Scenario
- Heat sink effect
Assemble Steps
- Step 1
- Step 2
Package Includes
- 1 x Mini Tower Kit
How to use OLED display
- Wiring diagram:
0.96 OLED display | Raspberry Pi GPIO |
---|---|
Vcc | 3.3V (physical pin No.1) |
GND | GND |
SDA | SDA |
SCL | SCL |
- Driver Install:
- Method 1 (Recommended):
0.96 inch OLED usage please refer to: [ https://wiki.52pi.com/index.php/S-0005 ] After installing ssd1306 driver, you can refer to the example code to create your own python script to show system informations.
- Method 2:
- This method will refer to Adafruit python SSD1306 example for this display.
Open a terminal and Download demo code from: [ https://github.com/adafruit/Adafruit_Python_SSD1306 ]
sudo python -m pip install --upgrade pip setuptools wheel git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git cd Adafruit_Python_SSD1306 sudo python setup.py install pip install Adafruit-BBIO
- Run example Demo:
cd examples/ python stats.py
Keywords
- Mini Tower Kit, 3D printed Case, Raspberry Pi case, Raspberry Pi case with oled display.