EZ-0080

Descrition

The X735 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40-pin header.
It provides intelligent and safe power management, safe shutdown and full poweroff through software,
an automatic temperature controlled fan which enables the use of the Raspberry Pi in extreme conditions
including very high temperature environments.
The X735 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.

• FOR USE WITH

Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+

• OPERATING SYSTEM

Raspbian Stretch
Safe shutdown function tested for Raspbian, other operating systems to be tested and advised

Features

• Intelligent and safe power management
• Equipped with both momentary button and latching switch for easy power control
• Press the momentary button to turn on
• Press the momentary button and hold for 1~2seconds to reboot
• Press the momentary button and hold for 3~7seconds to implement safe shutdown
• Press the momentary button and hold for >8seconds to force shutdown
• Supports safe shutdown and full poweroff through software
• On-board switch convenient to select latching or momentary power control switches
• Press the latching power switch once to turn on and again to implement safe shutdown
• On-board LED shows the status of power on, reboot and shutdown
• On-board PH2.0 connectors allows to use external latching switch or momentary button
• Powers the Raspberry Pi via the 40-pin header - no additional cabling required
• Allows power input via DC jack or Micro-USB socket or XH2.54 connector
• Allows power output via XH2.54 socket and or the 40-pin header

Note:

• Dual trip point temperature controlled cooling fan
• Auto-Control the fan for Cooling / quiet Operation
• Board temperature ≤34C - Fan running at low speed
• Board temperature ≥34C - Fan running at medium speed
• Board temperature ≥45C - Fan running at full speed
• On-board LEDs show the status of fan running low and high
• No driver and additional setting required for the cooling fan

• Reserved 40-pin stackable Header for Add-On Boards
• Works with all current models of the Raspberry Pi using a 40 pin header
• On-board micro-USB socket for power input - No need to change the power adapter
• Fully compatible with X820, X850, X860, X870, X822, X852 to provide intelligent and safe power management