P-0044: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Created page with "==")
 
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
==
=5V/5A 27W power supply with interchangeable plug standards=
SKU: P-0044
[[File:P-0044-01.jpg|right|320px]]
 
==Description==
A power supply with interchangeable plug standards, supporting US, UK, EU, and AU standards.
This product belongs to the 30W series, which does not mean it has a 30W power rating. Instead, it indicates a series of products with power ratings below 30W.
==SPECIFICATION==
* Type specification： P-0044-PD30W1C  5V5A/9V3A/12V2.25A/15V1.8A
* Scope: SMPS Adaptor(Wall mount) mechanical and environmental specifications of a SMPS, the power supplyprovides 27W continuous output power. The power supply shall meet the RoHS requirements
===Input Characteristics===
* Input Voltage & Frequency
{| class="wikitable"
|-
! specifications !!Minimum!! Rating!!Maximum
|-
|Input Voltage ||90Vac  || 100Vac~240Vac|| 264Vac
|-
| Input Frequency || 47Hz ||60Hz/50Hz ||60Hz
|}
 
* Inrush Current (cold start @ 120V AC)
No damage for 120V/50Hz at cold start (25℃)
 
* Average Efficiency
While input 110-240Vac ,the average efficiency is more than85.4% .The test point is at 25%,50%,75%and100%of max load respectively.
 
* Standby power 
Standby power ≤1W @ 230VAC/50Hz.
 
* Cooling
Natural convection
 
* Mean Time Between Failure（MTBF）
The MTBF for the power adapter shall equal or exceed 10,000 hours when operated at full rated loadinanambienttemperature of 25 degree C.
 
* Output Characteristics
{| class="wikitable"
|-
! Item !!Minimum!! Nominal!!Maximum
|-
| OUTPUT voltage Type-C ||4.75V || 5V || 5.25V
|-
| || 8.55V || 9V || 9.45V
|-
| || 11.4V || 12V ||  12.6V
|-
| || 14.25V || 15V||  15.75V
|-
|Full-load current Type-C|| PDO:5V5A/9V3A/12V2.25A/15V1.8A
|-
|Total power Type-C || 27W
|-
|Fast charging protocol || Customized Protocol
|}
Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uFceramiccapacitor and a 47uF electrolysis capacitor.
 
===Protection Requirements===
* Over Current Protection： OCP Point Limited: 110%-300% auto restart
The output shall hiccup when the over current applied to the output , and shall be self-recovery whenthefaultcondition is removed
 
* Short Circuit Protection
The input power shall decrease when the output is short to GND, the power supply shall not damage, andshallbeself-recovery when the fault condition is removed.
 
===Environment Requirements===
* Operating Temperature and Relative Humidity: 0℃ to +40℃ 20%RH to 80%RH @ Sea level shall below or no more than2000M
* Storage Temperature and Relative Humidity: -30℃ to +70℃ 10%RH to 90%RH（non-condensing）@ Sea level shall below 10000M
* Vibration: 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicularaxes X, Y, Z
 
===EMC Standards & Safety Standards / EMC===
* EMC Standards/EMC
{| class="wikitable"
|-
|EN 55022 || EN 55022 || CISPR 22 || CISPR22
|-
| EN 61000-3-2 || EN 61000-3-2 || EN 61000-4-2 ||EN 61000-4-2
|-
|EN 61000-4-5 || EN 61000-4-5 || EN 61000-4-8 ||EN 61000-4-8
|-
|EN 61000-4-11 || J55022 || ||
|}
* Safety Standards
{| class="wikitable"
|-
!! Country !! Type !! Standard
|-
| ETL || USA || UL62368
|-
| GBR || UKCA-LVD || EN IEC 61558
|-
| CE || Europe || EN60950-1
|-
| Japan || PSE || J60950
|}
 
* Ielectric Strength(Hi-pot): Primary to Secondary:3000Vac / 5mA / 60 seconds (3 seconds for production)
* Leakage Current: 0.25mA max. at 240Vac / 50Hz input
* Insulation Resistance: 100MΩ min. @ primary to secondary add a 500Vdc test voltage
===Reliability Requirements===
* Burn-in: The power supply shall be burn-in for 2 Hours under normal input and 80% rated load.
===Testing Equipment===
{| class="wikitable"
|-
!! NO. !! Testing Equipment !! Model !! Remark
|-
| 1 || AC Source || Ainuo ||
|-
| 2 || ower Meter || 8710C||
|-
| 3 || Electronic Load || JT6330A||
|-
|4 ||Oscilloscopes|| MDO3014||
|-
| 5 || Digital Multimeter || FLUKE 15B||
|-
|6 || DC Power || IT6721||
|-
|7 || HI-POT Tester || RK7122||
|-
|8 || Cons. T/H Simulator || XINBAO||
|}
==Product Drawing==
[[File:Product drawing.png|left|800px]]
<br style="clear:both;">
* AC Plug: UK/US/AU/EU removable plug
* DC Plug: Type-C
* DC Cable Spec: 3 wires, 18# x 2, 26# x 1, Type-C
* DC Cable Size: 1.2M
 
==Gallery==
* Product size
[[File:P-0044-03.jpg |left|800px]]
<br style="clear:both;">
* EU Standard
[[File:P-0044-02-欧标.jpg|left|800px]]
<br style="clear:both;">
* US Standard
[[File:P-0044-02-美标.jpg|left|800px]]
<br style="clear:both;">
* AU Standard
[[File:P-0044-02-澳标.jpg|left|800px]]
<br style="clear:both;">
* UK Standard
[[File:P-0044-02-英标.jpg|left|800px]]
<br style="clear:both;">
==Product Includes==
[[File:P-0044-01.jpg|left|800px]]
<br style="clear:both;">

Latest revision as of 18:57, 20 January 2026

5V/5A 27W power supply with interchangeable plug standards

SKU: P-0044

P-0044-01.jpg

Description

A power supply with interchangeable plug standards, supporting US, UK, EU, and AU standards. This product belongs to the 30W series, which does not mean it has a 30W power rating. Instead, it indicates a series of products with power ratings below 30W.

SPECIFICATION

  • Type specification： P-0044-PD30W1C 5V5A/9V3A/12V2.25A/15V1.8A
  • Scope: SMPS Adaptor(Wall mount) mechanical and environmental specifications of a SMPS, the power supplyprovides 27W continuous output power. The power supply shall meet the RoHS requirements

Input Characteristics

  • Input Voltage & Frequency
specifications Minimum Rating Maximum
Input Voltage 90Vac 100Vac~240Vac 264Vac
Input Frequency 47Hz 60Hz/50Hz 60Hz
  • Inrush Current (cold start @ 120V AC)

No damage for 120V/50Hz at cold start (25℃)

  • Average Efficiency

While input 110-240Vac ,the average efficiency is more than85.4% .The test point is at 25%,50%,75%and100%of max load respectively.

  • Standby power

Standby power ≤1W @ 230VAC/50Hz.

  • Cooling

Natural convection

  • Mean Time Between Failure（MTBF）

The MTBF for the power adapter shall equal or exceed 10,000 hours when operated at full rated loadinanambienttemperature of 25 degree C.

  • Output Characteristics
Item Minimum Nominal Maximum
OUTPUT voltage Type-C 4.75V 5V 5.25V
8.55V 9V 9.45V
11.4V 12V 12.6V
14.25V 15V 15.75V
Full-load current Type-C PDO:5V5A/9V3A/12V2.25A/15V1.8A
Total power Type-C 27W
Fast charging protocol Customized Protocol

Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uFceramiccapacitor and a 47uF electrolysis capacitor.

Protection Requirements

  • Over Current Protection： OCP Point Limited: 110%-300% auto restart

The output shall hiccup when the over current applied to the output , and shall be self-recovery whenthefaultcondition is removed

  • Short Circuit Protection

The input power shall decrease when the output is short to GND, the power supply shall not damage, andshallbeself-recovery when the fault condition is removed.

Environment Requirements

  • Operating Temperature and Relative Humidity: 0℃ to +40℃ 20%RH to 80%RH @ Sea level shall below or no more than2000M
  • Storage Temperature and Relative Humidity: -30℃ to +70℃ 10%RH to 90%RH（non-condensing）@ Sea level shall below 10000M
  • Vibration: 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicularaxes X, Y, Z

EMC Standards & Safety Standards / EMC

  • EMC Standards/EMC
EN 55022 EN 55022 CISPR 22 CISPR22
EN 61000-3-2 EN 61000-3-2 EN 61000-4-2 EN 61000-4-2
EN 61000-4-5 EN 61000-4-5 EN 61000-4-8 EN 61000-4-8
EN 61000-4-11 J55022
  • Safety Standards
! Country Type Standard
ETL USA UL62368
GBR UKCA-LVD EN IEC 61558
CE Europe EN60950-1
Japan PSE J60950
  • Ielectric Strength(Hi-pot): Primary to Secondary:3000Vac / 5mA / 60 seconds (3 seconds for production)
  • Leakage Current: 0.25mA max. at 240Vac / 50Hz input
  • Insulation Resistance: 100MΩ min. @ primary to secondary add a 500Vdc test voltage

Reliability Requirements

  • Burn-in: The power supply shall be burn-in for 2 Hours under normal input and 80% rated load.

Testing Equipment

! NO. Testing Equipment Model Remark
1 AC Source Ainuo
2 ower Meter 8710C
3 Electronic Load JT6330A
4 Oscilloscopes MDO3014
5 Digital Multimeter FLUKE 15B
6 DC Power IT6721
7 HI-POT Tester RK7122
8 Cons. T/H Simulator XINBAO

Product Drawing

Product drawing.png


  • AC Plug: UK/US/AU/EU removable plug
  • DC Plug: Type-C
  • DC Cable Spec: 3 wires, 18# x 2, 26# x 1, Type-C
  • DC Cable Size: 1.2M

Gallery

  • Product size
P-0044-03.jpg


  • EU Standard
P-0044-02-欧标.jpg


  • US Standard
P-0044-02-美标.jpg


  • AU Standard
P-0044-02-澳标.jpg


  • UK Standard
P-0044-02-英标.jpg


Product Includes

P-0044-01.jpg


Retrieved from "https://wiki.52pi.com/index.php?title=P-0044&oldid=16233"