From 52Pi Wiki
Revision as of 11:03, 14 April 2021 by TaterLi (talk | contribs)
Jump to navigation Jump to search

Jetson Nano Iron Case(B01Version)

JesonNano 01.jpg


NOTE: The Jetson Nano mainboard and the antenna, camera are not included in the package

This is a jetson nano case, which can provide switch button, RESET button, FR mode (Factory Recovery mode) antenna interface mounting hole.
It can be installed after you purchase the antenna, also provides an internal cooling fan and installation screwdriver, it is Made of sheet iron.
Tt is very beautiful and strong, which can protect your jetson nano very well, and also provides a fan that supports PWM signal.


  • Easy to assemble
  • Contains necessary components
  • Support key switch
  • Support reset button
  • Support factory mode button
  • Support additional antenna installation
  • Provide sheet iron protection


JesonNano 02.jpg
JesonNano 03.jpg
JesonNano 04.jpg
JesonNano 05.jpg
JesonNano 06.jpg
JesonNano 07.jpg

Installation Detials

Installation guide1.jpg
Installation guide2.jpg

Package Includes

  • 1 x Jetson Nano iron case
  • 1 x side fan
  • 1 x PWM speed control fan
  • 2 x camera iron bracket
  • 4 x long screws
  • 4 x nut
  • 8 x short screws
  • 8 x acrylic gasket
  • 2 x jumper cap
  • 8 x housing screws
  • 1 x tweezers
  • 1 x screwdriver
  • 1 x Reset button
  • 1 x FC mode button
  • 1 x power switch


  • jetson nano, Jetson Nano Iron Case(B01Version), Iron case,