ZP-0072: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
Line 53: Line 53:


==Package Include==
==Package Include==
* 1 x
[[ File:ZP-0072-Jeson-Nano铝合金外壳4.jpg|left | 500px]]
* 1 x
* 1 x
* 1 x
* 1 x
 
[[ File:ZP-0072-Jeson-Nano 9.jpg |left | 500px]]
<br style="clear:both;">
<br style="clear:both;">



Revision as of 16:46, 7 January 2020

Aluminum Case for Jetson Nano

Jetsoncase01.jpg

Description

This is an all-metal functional enclosure specifically tailored for Jetson Nano.
Its honeycomb vents reduce the heat generated by your device while it’s performing neural network training or running machine vision programs.
And the internal super quiet fan will be good auxiliary heat dissipation, beautiful workmanship of the outer casing, perfect interface opening for each connector.
In addition, in order to consider the equipment that Jetson Nano may use, such as the camera, it specially provide the camera holder for Jetson Nano.
The metal bracket makes your visual neural network learning device more convenient to use.
At the same time, it provides two perfect wireless network expansion antenna interfaces for the Jetson Nano on the outer casing, so that you can avoid Metal shielding interference when it accessing network via extend network interface card, such as intel network card.
A switch button with backlight is provided on the front of the panel.
In order to prevent mistakenly touching, a reset button is provided on the back of the panel.
Four anti-skid rubber pads are added to the bottom of the case to prevent skid.

Features

  • Easy to assemble
  • Camera holder
  • Extended Antenna Base for the network interface card
  • Honeycomb vents style
  • Super quiet fan
  • Good quality
  • Anti-skid rubber pads

Gallery

Jetsoncase01.jpg
Jetsoncase02.jpg
Jetsoncase03.jpg
Jetsoncase04.jpg
Jetsoncase05.jpg
Jetsoncase01.jpg

How to assemble

  • Fix Jetson Nano board to aluminum case with screws
  • Connect the
ZP 0072 Jeson-Nano 6.jpg
ZP-0072-Jeson-Nano 7.jpg
ZP-0072-Jeson-Nano 8.jpg
  • Camera bracket assemble
ZP-0072-Jeson-Nano 10.jpg


  • Wi-Fi module assemble
    • Step 1. Remove the two screws on Jetson Nano, detach the Jetson Nano and remove the screw in the middle of the board.\
    • Step 2. Connect the extension antenna cable to wireless interface card on IPEX connector, tighten the nut and washer to aluminum case to each SMA connector, and then put the wireless interface
  card into the M.2 socket, screw it tightly.
    • Step 3. Insert the Jetson Nano into the socket and make sure the clamps lock it in and then screw it again.
    • Step 4. Connect the antennas to the extension antenna cable.

Package Include

ZP-0072-Jeson-Nano铝合金外壳4.jpg


Keywords

  • jetson nano case, case for jetson nano, aluminum case, quiet fan, fan, heatsink, honycomb vent, jetson nano

FAQ