Z-0269a

From 52Pi Wiki
Revision as of 18:54, 27 August 2021 by Yoyojacky (talk | contribs) (Yoyojacky moved page Pitaya go SKU: Z-0269 to Z-0269a)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Pitaya go

Pitaya-go-product-parts-w.png

Description

Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extreme low power Wi-Fi® network controller ATWINC1500B.
It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT.

Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets.
All these features above make this board an ideal choice for the next IoT project.

Features

  • Nordic Semiconductor nRF52840 SoC
    • 64 MHz Arm® Cortex-M4 with FPU
    • 1 MB Flash + 256 KB RAM
    • Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary
    • Arm TrustZone® Cryptocell 310 Security Subsystem
    • Integrated USB 2.0 Full-speed Controller
    • QSPI/SPI/TWI/I²S/PDM/QDEC/ADC support
    • Integrated NFC-A Tag
  • Microchip ATWINC1500B Wi-Fi Network Controller
    • Shipped with the latest firmware 19.6.1
    • IEEE 802.11 b/g/n 20 MHz (1x1) Solution
    • Extreme low power with Shutdown Control
    • On-Chip Network Stack to Offload MCU
    • Supports Soft-AP
    • Security protocols supported: WPA/WPA2 Personal, TLS/SSL
    • Enterprise Security with WPA/WPA2 (802.11x)
    • Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS, MQTT
  • 64Mbit ultra-low power QSPI Flash Memory
  • Integrated Li-Po Battery Charger with Power Path Management
  • Additional NFC-A Tag PCB Antenna
  • User programmable RGB LED and Buttons
  • Dual Wi-Fi/Bluetooth 2.4G Chip Antennas
  • Reversible USB-C Connector
  • Li-Po Battery Connector
  • Easily expandable dual 14-Pin Header Sockets
  • Measures 2.4" x 1.0" x 0.3" (60.96mm x 25.4mm x 7.6mm)

Hardware Diagram

Pitaya-go pinout.png


Tutorials

Design Files

Package Include

  • 1 x Pitaya Go Board
  • 1 x NFC PCB Antenna
  • 1 x USB-C Cable

Keywords

  • Pitaya go, makerdiary, NFC PCB antenna