Z-0269: Difference between revisions
Jump to navigation
Jump to search
Line 58: | Line 58: | ||
==Keywords== | ==Keywords== | ||
* Pitaya Go IoT, Development board, nrf5-sdk, pitaya, geeekpi, 52pi, programming, wifi tutorials, openthread tutorials |
Revision as of 15:31, 17 December 2019
Pitaya Go IoT
Description
Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extreme low power Wi-Fi® network controller ATWINC1500B.
It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT.
Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets.
Features
Nordic Semiconductor nRF52840 SoC
- 64 MHz Arm® Cortex-M4 with FPU
- 1 MB Flash + 256 KB RAM
- Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary
- Arm TrustZone® Cryptocell 310 Security Subsystem
- Integrated USB 2.0 Full-speed Controller
- QSPI/SPI/TWI/I²S/PDM/QDEC/ADC support
- Integrated NFC-A Tag
Microchip ATWINC1500B Wi-Fi Network Controller
- Shipped with the latest firmware 19.6.1
- IEEE 802.11 b/g/n 20 MHz (1x1) Solution
- Extreme low power with Shutdown Control
- On-Chip Network Stack to Offload MCU
- Supports Soft-AP
- Security protocols supported: WPA/WPA2 Personal, TLS/SSL
- Enterprise Security with WPA/WPA2 (802.11x)
- Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS, MQTT, etc.
Memory and Power
- 64Mbit ultra-low power QSPI Flash Memory
- Integrated Li-Po Battery Charger with Power Path Management
- Additional NFC-A Tag PCB Antenna
- User programmable RGB LED and Buttons
- Dual Wi-Fi/Bluetooth 2.4G Chip Antennas
- Reversible USB-C Connector
- Li-Po Battery Connector
- Easily expandable dual 14-Pin Header Sockets
- Measures 2.4" x 1.0" x 0.3" (60.96mm x 25.4mm x 7.6mm)
Gallery
Package Includes
- 1x Pitaya Go board
- 1x NFC-A PCB Antenna with MHF I connector
- 1x USB-C Cable
Documentations
- Getting Start: [ https://wiki.makerdiary.com/pitaya-go/getting-started/ ]
- How to program: [ https://wiki.makerdiary.com/pitaya-go/programming/ ]
- NRF5-SDK: [ https://wiki.makerdiary.com/pitaya-go/nrf5-sdk/ ]
- Wi-Fi Tutorials: [ https://wiki.makerdiary.com/pitaya-go/wifi/ ]
- Openthread Tutorials: [ https://wiki.makerdiary.com/pitaya-go/openthread/ ]
Keywords
- Pitaya Go IoT, Development board, nrf5-sdk, pitaya, geeekpi, 52pi, programming, wifi tutorials, openthread tutorials