View source for Z-0269

==Pitaya Go IoT==
[[File:Z 0269 4.jpg|right|300px]]

==Description==
Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extreme low power Wi-Fi® network controller ATWINC1500B. <br>
It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT.<br>
Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets.<br>

==Features==
===Nordic Semiconductor nRF52840 SoC===
* 64 MHz Arm® Cortex-M4 with FPU
* 1 MB Flash + 256 KB RAM
* Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary
* Arm TrustZone® Cryptocell 310 Security Subsystem
* Integrated USB 2.0 Full-speed Controller
* QSPI/SPI/TWI/I²S/PDM/QDEC/ADC support
* Integrated NFC-A Tag
===Microchip ATWINC1500B Wi-Fi Network Controller===
* Shipped with the latest firmware 19.6.1
* IEEE 802.11 b/g/n 20 MHz (1x1) Solution
* Extreme low power with Shutdown Control
* On-Chip Network Stack to Offload MCU
* Supports Soft-AP
* Security protocols supported: WPA/WPA2 Personal, TLS/SSL
* Enterprise Security with WPA/WPA2 (802.11x)
* Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS, MQTT, etc.
===Memory and Power===
* 64Mbit ultra-low power QSPI Flash Memory
* Integrated Li-Po Battery Charger with Power Path Management
* Additional NFC-A Tag PCB Antenna
* User programmable RGB LED and Buttons
* Dual Wi-Fi/Bluetooth 2.4G Chip Antennas
* Reversible USB-C Connector
* Li-Po Battery Connector
* Easily expandable dual 14-Pin Header Sockets
* Measures 2.4" x 1.0" x 0.3" (60.96mm x 25.4mm x 7.6mm)

==Gallery==
{|
|[[File:Z 0269 1.jpg|left|320px]]
|[[File:Z 0269 2.jpg |none|320px]]
|[[File:Z 0269 3.jpg |none|320px]]
|}
==Hardware Diagram==
[[File:Z 0269 5.jpg|left|800px]]
<br style="clear:both;">

==Package Includes==
* 1x Pitaya Go board
* 1x NFC-A PCB Antenna with MHF I connector
* 1x USB-C Cable
[[File:Z 0269 4 2.jpg |left|500px]]
<br style="clear:both;">

==Documentations==
* Getting Start: [ https://wiki.makerdiary.com/pitaya-go/getting-started/ ]
* How to program: [ https://wiki.makerdiary.com/pitaya-go/programming/ ]
* NRF5-SDK: [ https://wiki.makerdiary.com/pitaya-go/nrf5-sdk/  ]
* Wi-Fi Tutorials: [ https://wiki.makerdiary.com/pitaya-go/wifi/  ]
* Openthread Tutorials: [ https://wiki.makerdiary.com/pitaya-go/openthread/ ]

==Keywords==
* Pitaya Go IoT, Development board, nrf5-sdk, pitaya, geeekpi, 52pi, programming, wifi tutorials, openthread tutorials