EZ-0086: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Created page with "==X725== ==Description== The X725 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. <br> It provides intelligent and safe...")
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
==X725==
==X725==
[[File:Dcb 1.jpg|right |320px ]]
==Description==
==Description==
The X725 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. <br>
The X725 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. <br>
Line 6: Line 8:
The X725 can also be used with the X820, X825, X850, X855, X856, X828 (HDD/SSD Shield) for safe data backup.
The X725 can also be used with the X820, X825, X850, X855, X856, X828 (HDD/SSD Shield) for safe data backup.
==Note & Warnings==
==Note & Warnings==
<pre>
<font color=red>  
<font color=red>DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB or Type-C SOCKET.  
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB or Type-C SOCKET. <br>
DO NOT APPLY POWER TO X725 VIA THE MICRO USB SOCKET AND DC JACK AT THE SAME TIME.  
DO NOT APPLY POWER TO X725 VIA THE MICRO USB SOCKET AND DC JACK AT THE SAME TIME. <br>
DO NOT USE  18650 BATTERY WITH BUILT-IN PROTECTION CIRCUIT.
DO NOT USE  18650 BATTERY WITH BUILT-IN PROTECTION CIRCUIT.<br>
</font>
</font>
* You must read these safety instructions and warnings before charging your batteries.
<pre>
* Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly.
* Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-".
* Do not mix and use old batteries and new batteries, or batteries with different brand names.
* Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first.
* When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X720 on the wood material or carpet and unattended.
* Must keep the X720 away from children.
</pre>
</pre>
==Compatibility==
==Compatibility==
* Raspberry Pi 1 Model B+ /2 Model B/3 Model B/3 Model B+/3 Model A+/4 Model B
* Raspberry Pi 1 Model B+ /2 Model B/3 Model B/3 Model B+/3 Model A+/4 Model B
Line 65: Line 76:
* Recharge Threshold : 4.1V
* Recharge Threshold : 4.1V
==Gallery==
==Gallery==
{|
|[[File:Dcb 1.jpg|left |320px ]]
|[[File:Dxb 2.jpg|left |320px ]]
|[[File:Dxb 3.jpg|left |320px ]]
|}
{|
|[[File:Dxb 4.jpg|left |500px ]]
|[[File:Dxb 5.jpg|left |500px ]]
|}
==Package Includes==
===X725 BOARD KIT===
* X725 Expansion Board x 1
* Screw M2.5 *6mm x 8
* Spacer F/F M2.5 *23mm x 4
* Spacer F/M M2.5 *23mm x 4
* Jumper link Pitch 2.54mm x 3
* USB to Micro USB 2.0 cable x 1
===X725 DESKTOP COMUPTER KIT===
<pre>For Raspberry Pi 3 Model B only, not for Raspberry Pi 4</pre>
* X725 enclosure x 1
* GPIO reference & switch board x 1
* Power button board x 1
* Power switch cap x 1
* Socket spanner 4mm x 1
* Spacer F/M M2.5 *21mm x 4
* Screw M3 *6mm x 6
==Documentations==
* Hardware setup: [ http://www.suptronics.com/miniPCkits/x725-hardware.html ]
* Software configuration: [ http://www.suptronics.com/miniPCkits/x725-software.html ]
==Acrylic Case==
* Please refer to: [ https://wiki.52pi.com/index.php/Acrylic_Case_for_X725_SKU:_ZP-0096#Acrylic_Case_for_X725 ]
==Keywords==
* X725,Raspberry Pi 4B, power supply, expansion board, safe power management

Revision as of 14:35, 3 April 2020

X725

Dcb 1.jpg

Description

The X725 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header.
It provides intelligent and safe power management, remote power on/wake on lan, safe shutdown and full poweroff through software, an advanced uninterruptible power supply, and second 10/100M fast Ethernet.
The X725 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.
The X725 can also be used with the X820, X825, X850, X855, X856, X828 (HDD/SSD Shield) for safe data backup.

Note & Warnings

DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB or Type-C SOCKET.
DO NOT APPLY POWER TO X725 VIA THE MICRO USB SOCKET AND DC JACK AT THE SAME TIME.
DO NOT USE 18650 BATTERY WITH BUILT-IN PROTECTION CIRCUIT.

  • You must read these safety instructions and warnings before charging your batteries.
* Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly. 
* Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-". 
* Do not mix and use old batteries and new batteries, or batteries with different brand names. 
* Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first. 
* When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X720 on the wood material or carpet and unattended. 
* Must keep the X720 away from children. 

Compatibility

  • Raspberry Pi 1 Model B+ /2 Model B/3 Model B/3 Model B+/3 Model A+/4 Model B
  • OS: Raspbian Stretch
NOTE: Safe shutdown function tested for Raspbian, other operating systems to be tested and advised

Features

X725 POWER MANAGEMENT EXPANSION BOARD

  • Smart Uninterruptible Power Supply (UPS)
  • Provides continuous operations for up to 10hours (depending on battery type used)
  • 5.1V 8000mA Power Backup for even the most demanding Raspberry Pi set ups
  • 18650 dual Cells Lithium Ion Holder
  • Can work with single or dual 18650 Lithium Ion battery
  • Supports 2A via micro-USB socket or 3A via DC jack fast charging
  • Integrated battery protection circuit
  • Integrated over current protection and over voltage protection
  • Integrated Maxim's fuel-gauge systems (Reading battery voltage and percentage via i2c)
  • Integrated 10-A fully-integrated synchronous boost converter
  • Intelligent automatic charging and discharging
  • Automatic safe shutdown when battery low (voltage <3.0V)
  • On-board LED blinking when the battery condition low (voltage <3.0V)
  • On-board LEDs show the status of battery charging and discharging

Intelligent and safe power management

  • Press the power button to turn on
  • Press the button and hold for 1~2seconds to reboot
  • Press the button and hold for 3~7seconds to implement safe shutdown
  • Press the button and hold for >8seconds to force shutdown
  • Supports safe shutdown and full poweroff through software
  • On-board LED shows the status of power on, reboot and shutdown

Integrated second 10/100M fast Ethernet

  • Supports remote power on/wake on lan via Link-change, Magic packet, MS wakeup frame
  • On-board LED shows the status of power on/wakeup packet indication

Reserved 40-pin stackable Header for Add-On Boards

  • Powers the Raspberry Pi via the 40-pin header - no additional cabling required
  • Works with all current models of the Raspberry Pi using a 40 pin header
  • Power management and second Ethernet can still work without battery
  • On-board DC jack (5.5*2.5mm) and micro-USB socket convenient for power input
  • On-board connector allowing to connect external power switch and DIY your perfect case
  • Mounting holes and standoffs provide mechanical stability of the RPi and X725 assembly

X725 RASPBERRY PI 3 MODEL B DESKTOP COMPUTER KIT

  • Ultra-compact aluminum chassis
  • All ports and slots of the case can match with Raspberry Pi and X725 perfectly
  • Exhaust holes surface can reach perfect heat dissipation
  • Equipped with large power switch
  • All status LEDs still visible
  • Easy to change the Raspberry Pi OS SD card - No need to open the case
  • GPIO reference board included -Makes connecting wires to the Raspberry Pi GPIO incredibly easy
  • Grouped the GPIO pins into categories like I2C, IO, UART, SPI, and power

Technical Specification

  • Power supply via Micro-USB socket : 4.7~5.5Vdc, 2.5A Via DC power jack : 4.7~5.5Vdc ±5%, ≥4A
  • UPS output : 5.1V ±5% Max 8A
  • UPS charging current: 2A via Micro-USB socket, 3A via DC jack
  • Terminal Battery Voltage : 4.2V
  • Recharge Threshold : 4.1V

Gallery

Dcb 1.jpg
Dxb 2.jpg
Dxb 3.jpg
Dxb 4.jpg
Dxb 5.jpg

Package Includes

X725 BOARD KIT

  • X725 Expansion Board x 1
  • Screw M2.5 *6mm x 8
  • Spacer F/F M2.5 *23mm x 4
  • Spacer F/M M2.5 *23mm x 4
  • Jumper link Pitch 2.54mm x 3
  • USB to Micro USB 2.0 cable x 1

X725 DESKTOP COMUPTER KIT

For Raspberry Pi 3 Model B only, not for Raspberry Pi 4
  • X725 enclosure x 1
  • GPIO reference & switch board x 1
  • Power button board x 1
  • Power switch cap x 1
  • Socket spanner 4mm x 1
  • Spacer F/M M2.5 *21mm x 4
  • Screw M3 *6mm x 6

Documentations

Acrylic Case

Keywords

  • X725,Raspberry Pi 4B, power supply, expansion board, safe power management