X600 SKU:EZ-0045: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=X600 EXPANSION BOARD= left|300px ---- ==Features== {| class="wikitable" ! Parameter !! Value |- |Input Voltage || 6V to 20Vdc converted to 5V, 3A...") |
|||
Line 1: | Line 1: | ||
=X600 EXPANSION BOARD= | =X600 EXPANSION BOARD= | ||
[[File:X600 860p 2.jpg|left|300px]] | [[File:X600 860p 2.jpg|left|300px]] | ||
<br style="clear:both;"> | |||
---- | ---- | ||
==Features== | ==Features== |
Revision as of 12:47, 18 October 2016
X600 EXPANSION BOARD
Features
Parameter | Value |
---|---|
Input Voltage | 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device |
Audio & Video |
- Allows you to extract audio signals from HDMI of your Raspberry Pi - Converts HDMI audio to digital optical or Coaxial or stereo RCA analog - The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio - Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack - Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH - Maintains surround format when converting to digital optical audio - Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input - Supports HDMI signal amplification and equalization output for repeater function - HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond |
SATA | Allows you to connect SATA devices to your Raspberry Pi |
Wireless | Built in IR sensor (38KHz) |
Misc |
- Power output socket - Directly connected on top of the Raspberry Pi using the board GPIO header pins - No wiring nor soldering is required - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards - Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW! |
Dimensions | 85 x 56mm (Same size as Raspberry Pi) |
Notes 1. The RCA L/R output will not have sound if the incoming audio is multi-channel audio (>2CH). Set EDID switch to 2CH for RCA L/T stereo application. 2. TOSLINK optical audio output does not support Dolby Digital Plus (used by Roku and Chromecast) and higher formats, such as HD audio (Dolby TrueHD, DTS-HD Master Audio, PCM5.1 and beyond). 3. Set audio EDID to 5.1CH for DD5.1CH / DTS5.1CH, use optical output to connect to audio receiver for surround sound.