X6000K SKU:EZ-0056: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=X6000K-8.0CH DIY Kits= ==Description== X6000K-8.0CH DIY Kits for Raspberry Pi. ---- ==For Use With== * Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B ---- ==Operating Syste...") |
|||
Line 85: | Line 85: | ||
==Gallery== | ==Gallery== | ||
{| | {| | ||
|[[Xseries case-280p1.jpg|left|500px]] | |[[File:Xseries case-280p1.jpg|left|500px]] | ||
|[[File:X6000k2.jpg|none|500px]] | |[[File:X6000k2.jpg|none|500px]] | ||
|} | |} |
Revision as of 17:20, 21 March 2017
X6000K-8.0CH DIY Kits
Description
X6000K-8.0CH DIY Kits for Raspberry Pi.
For Use With
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Operating System
- OSMC - 8.0 channel stereo audio outputs
- Moode Audio Player - 8.0 channel stereo audio outputs
- Raspbian Jessie - 8.0 channel stereo audio outputs
- Openelec - To be tested
- Volumio - To be tested
- Rune audio - To be tested
- Pi Core Player - To be tested
Key Features
- Ultra-compact chassis
- Ideal for car audio entertainment
- Ideal for stage audio systems
- Ideal for multi-channel audio systems
- 8-channel stereo audio outputs at the same time even if playing 2-channel audio
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi - no additional cables needed
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Access to Raspberry Pi GPIO
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
Power Supply Unit
- AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
- DC Power Plug Size : 5.5*2.5mm
Specification
Parameters | Values |
---|---|
Power supply: | +5Vdc +/-5% |
Input Ports: | 1 x HDMI |
Output Ports: | 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack |
Analog audio output level: | 2V RMS |
Optical S/PDIF Audio Sampling Rate: | Up to 192 kHz |
HDMI Audio Format: | LPCM 8.0CH |
Optical Audio Format: | LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH |
Size: | 122mm x 90mm x 90mm |
Notes
For use with original power supply unit only WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. Approx. 3 seconds delay to turn on Raspberry Pi after the power button is pressed (The powerful HDMI audio processing chipset needs time to bootup)
Packing List
- X6000 Metal Case x 1
- X6000-8.0CH Expansion Board x 1
- X800K HDD Expansion Board x 1
- Accessories kit x 1
- Tool kit x 1
Gallery