The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
X5000P Raspberry Pi HiFi Sound Card
Description
Raspberry Pi HiFi Sound Card.
For Use With
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Operating System
- Moode Audio Player
- OSMC
- Openelec
- Raspbian Jessie
- Volumio
- Pi Core Player
Key Features
- Dedicated 192kHz/24bit high-quality ESS DAC for best sound quality
- Used the ESS Technology Sabre premier stereo DAC ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Ultra-low-jitter 50MHz clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Used the Texas Instruments ClassD amplifier chipset (TPA3118)
- Up to 2x35w of crystal clear amplification
- Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
- Gold-plated RCA connectors
- Volume control knob
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Connects directly to the Raspberry Pi
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- AMP can be enabled / disabled with jumper link
- Powers the Raspberry Pi - no additional power supply
- Duplicated Raspberry Pi HDMI port
- Easy DIY with Raspberry Pi
Power Supply Unit
- AC 100 - 240V input ~50 / 60Hz, 19Vdc 4A output
- DC Power Plug Size : 5.5*2.5mm
Specification
| Parameters |
Values
|
| Power supply: |
6-24Vdc
|
| Input Ports: |
1 x HDMI , Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
|
| Output Ports: |
1 x HDMI, 2 x RCA connectors
|
| Analog audio output level: |
2V RMS
|
| Resolution/Sampling Rate: |
Upto 24bit / 192KHz (Raspberry Pi I2S)
|
| Amplifier output Power: |
2 x 35w (4 Ohm 24Vdc)
|
| Size: |
122mm x 90mm x 90mm
|
Notes
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
Packing List
- X5000 Expansion Board x 1
- HDMI bridge x 1
- Power switch x 1
- Volume control board x 1
- Screw M2.5 *6mm x 8
- Spacer M2.5 *20mm x 4
- Speaker connection wire 20cm x 1
Gallery
