The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
X5000K DIY Kits
Description
For Use With
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Operating System
- Moode Audio Player
- OSMC
- Openelec
- Raspbian Jessie
- Volumio
- Pi Core Player
Key Features
- Ultra-compact chassis
- Supports up to 1TB 2.5-inch SATA hard drives
- Dedicated 192kHz/24bit high-quality ESS DAC for best sound quality
- Used the ESS Technology Sabre premier stereo DAC ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Ultra-low-jitter 50MHz clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Used the Texas Instruments ClassD amplifier chipset (TPA3118)
- Up to 2x35w of crystal clear amplification
- Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
- Gold-plated RCA connectors
- Gold-plated Speaker terminal binding post
- Volume control knob
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Connects directly to the Raspberry Pi - no additional cables needed
- Can be used individually with only 3 wire I2S signal connected from other i2s interface
- AMP can be enabled / disabled with jumper link
- Powers the Raspberry Pi - no additional power supply
- Lighted power switch
- Raspberry Pi status LEDs still visible
- Duplicated Raspberry Pi HDMI port
- Easy to change the Raspberry Pi OS SD card - No need to open the case
- Easy DIY with Raspberry Pi
Power Supply Unit
- (Optional Accessories)
- AC 100 - 240V input ~50 / 60Hz, 19Vdc 4A output
- DC Power Plug Size : 5.5*2.5mm
Specification
| Parameters |
Values
|
| Power supply: |
6-24Vdc
|
| Input Ports: |
1 x HDMI Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
|
| Output Ports: |
1 x HDMI, 2 x RCA connectors, 4 x Speaker terminal binding post
|
| Analog audio output level: |
2V RMS
|
| Resolution/Sampling Rate: |
upto 24bit / 192KHz (Raspberry Pi I2S)
|
| Amplifier output Power: |
2 x 35w (4 Ohm 24Vdc)
|
| Size: |
122mm x 90mm x 90mm
|
Notes
WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
Packing List
- X5000 Metal Case x 1
- X5000 Expansion Board x 1
- X800 HDD Expansion Board x 1
- Metal Case Accessories kit x 1
- Tool kit x 1
