X4000K SKU:EZ-0055

From 52Pi Wiki
(Redirected from X4000K DIY Kits SKU:EZ-0055)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

X4000K DIY Kits

For Use With

  • Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B

Operating System

  • Moode Audio Player - Supports X4000 HDMI audio and RPi i2s audio
  • OSMC - Supports X4000 HDMI audio
  • Openelec - Supports X4000 HDMI audio
  • Raspbian Jessie - Supports X4000 HDMI audio
  • Rune audio - Supports X4000 HDMI audio
  • Pi Core Player - To be tested

Key Features

  • High-quality ESS DAC for best sound quality
  • Use the ESS Technology flagship DAC chipset (ES9018K2M)
  • 127dB DNR -120dB THD+N
  • It can playback upto 384khz I2S/DSD256 with Raspberry Pi 3 (Over HDMI, Moode Player)
  • Used the Texas Instruments Burr-Brown OPA2604 low noise OP AMP
  • Used the ultralow phase noise 100MHz HiFi TCXO
  • Used the Texas Instruments ultra-low-noise voltage regulator
  • Gold-plated RCA connectors
  • Supports up to 1TB 2.5-inch SATA hard drives
  • Selectable HDMI audio or Raspberry Pi i2S audio
  • Supports SPDIF Optical Digital Audio
  • Supports HDMI high-bit-rate (HBR) audio
  • High quality video performance
  • 3.5mm analog stereo jack output
  • Allows you to split the audio stream from a HDMI signal
  • No HDMI output connection is required to receive audio at the analog and optical outputs
  • Connects directly to the Raspberry Pi - no additional cables needed
  • Can be used individually with only 3 wire I2S signal connected from other i2s interface
  • Ultra-compact chassis
  • Powers the Raspberry Pi - no additional power supply
  • Lighted power switch
  • Raspberry Pi status LEDs still visible
  • Easy to change the Raspberry Pi OS SD card - No need to open the case
  • Easy DIY with Raspberry Pi

Specification

Parameters Values
Power supply: +5Vdc +/-5%
Input Ports: 1 x HDMI, Three wire Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)
Output Ports: 1 x HDMI, 2 x RCA connectors, 1 x 3.5mm Phone Jack + Optical
Analog audio output level: 2V RMS
Resolution/Sampling Rate: upto 32bit / 384KHz (ES9018K2M), upto 24bit / 192KHz (Raspberry Pi I2S), upto 24bit / 192KHz (Optical S/PDIF Audio)
Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
Size: 122mm x 90mm x 90mm

Power Supply Unit

  • AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
  • With 2 snap-in plugs for North America (US) and Europe (EU)
  • DC Power Plug Size : 5.5*2.5mm

Notes

For use with original power supply unit only
WARNING: 
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. 
Approx 3 seconds delay to turn on Raspberry Pi after the power button is pressed
(The powerful HDMI audio processing chipset needs time to bootup)

Packing List

  • X4000 Metal Case x 1
  • X4000 Expansion Board x 1
  • X800K HDD Expansion Board x 1
  • Power Adapter 5V 4A x 1
  • Metal case Accessories kit x 1
  • Tool kit x 1

Gallery

Xseries case-280p1.jpg
X4000k2.jpg

X4000k3.jpg
X4000k4.jpg

X4000k3.jpg
X4000k4.jpg

X4000k5.jpg
X4000k6.jpg

X4000-280p1.jpg
X800 280P1.jpg

PA 5V 4A 280p1.jpg
X800K-280p1.jpg

Tool kit 280p1.jpg
X-case-280p1.jpg