X205 SKU: EZ-0046
Jump to navigation
Jump to search
X205 EXPANSION BOARD FOR RASPBERRY PI
KEY FEATURES
Parameters | Values |
---|---|
Input Voltage | 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi |
RS232 serial communications | Control the Raspberry Pi over RS232 or connect to external serial accessories |
RS485 serial communications | You will be able to have a communication port for your field bus directly connected to your RPi!
- It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10Mbit/s. |
Audio | 3.5mm MIC in jack
- 3.5mm stereo audio jack - Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2) |
Wireless | WiFi (IEEE 802.11b/g/n) with external antenna
- IR sensor (38KHz) |
USB Storage | Self-powered USB hub with 3 ports |
Real-time clock (RTC) | Based on DS3231SN with included CR2032 battery |
GPIO Control | 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current |
Misc | Power output socket
- Camera flex slot so camera can still be used with the expansion board attached - DIP switch to remove connection from RPi’s pin header - Directly connected on top of the Raspberry Pi using the board GPIO header pins - No wiring nor soldering is required - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards - Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW! |
Dimensions | 85 x 56mm (Same size as Raspberry Pi) |