X205 SKU: EZ-0046: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==X205 EXPANSION BOARD FOR RASPBERRY PI== left|300px <br style="clear:both;"> ---- {|- |left |none |F...") |
No edit summary |
||
| Line 4: | Line 4: | ||
---- | ---- | ||
{|- | {|- | ||
|[[File:X205 | |[[File:X205 165p3.jpg|left]] | ||
|[[File:X205 | |[[File:X205 165p4.jpg|none]] | ||
|[[File:X205 | |[[File:X205 165p5.jpg|none]] | ||
|} | |} | ||
<br style="clear:both;"> | <br style="clear:both;"> | ||
Revision as of 17:06, 11 October 2016
X205 EXPANSION BOARD FOR RASPBERRY PI
 |
 |
 |
KEY FEATURES
| Parameters | Values |
|---|---|
| Input Voltage | 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi |
| RS232 serial communications | Control the Raspberry Pi over RS232 or connect to external serial accessories |
| RS485 serial communications | You will be able to have a communication port for your field bus directly connected to your RPi!
- It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10Mbit/s. |
| Audio | 3.5mm MIC in jack
- 3.5mm stereo audio jack - Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2) |
| Wireless | WiFi (IEEE 802.11b/g/n) with external antenna
- IR sensor (38KHz) |
| USB Storage | Self-powered USB hub with 3 ports |
| Real-time clock (RTC) | Based on DS3231SN with included CR2032 battery |
| GPIO Control | 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current |
| Misc | Power output socket
- Camera flex slot so camera can still be used with the expansion board attached - DIP switch to remove connection from RPi’s pin header - Directly connected on top of the Raspberry Pi using the board GPIO header pins - No wiring nor soldering is required - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards - Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW! |
| Dimensions | 85 x 56mm (Same size as Raspberry Pi) |
