EP-0100

From 52Pi Wiki
Revision as of 13:40, 23 April 2019 by Yoyojacky (talk | contribs) (Created page with "==UPS for Raspberry Pi 3B/3B Plus== This is an uninterruptible power supply for the Raspberry Pi. <br> It provides enough power for the Raspberry Pi to make your Raspberry Pi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

UPS for Raspberry Pi 3B/3B Plus

This is an uninterruptible power supply for the Raspberry Pi.
It provides enough power for the Raspberry Pi to make your Raspberry Pi still work while moving,
and its design is so smart that you can get rid of troubled of a mass wire.
This UPS can provide you with the operation of replacing the battery yourself.
It can use most of the 18650 standard batteries and fully comply with the battery characteristics in terms of battery life.
In addition, the power display provided on the circuit board is also very user-friendly.
The illuminated LED light can quickly show the remain power and support the discharging while charging.
You can directly connect to the external power supply for charging.
At the same time, the Raspberry Pi will not be turned off.

Caution

Warning!

This product belongs to the power supply device. 
Please keep it out of the reach of children. Please strictly refer to the instructions for the UPS  product. If the battery polarity is reversed, it will directly burn the power management chip of the device and even cause fire or personal injury. Do not add any Components by yourself, all accidental damage caused by the cause is at your own risk.

Features

  • LED remaining battery prompt
  • Contact type power supply
  • Replaceable battery solution
  • Advanced power management chip
  • Charge and discharge management separately
  • Support Raspberry Pi 3B/3B+
  • 18650 power solution
  • 4.85v/1.7A ≈ 8.25W output capability
  • Two USBA port power output
  • Output overcurrent protection
  • Thimble output, to avoid occupying GPIO-
  • Tap to boot, long press to shut down
  • Support the charge and discharge power display
  • The battery holder can be quickly replaced

Charging Feature

  • Synchronous switch charge and discharge
  • 2.4A synchronous boost conversion, 2.1A synchronous switch charging
  • Built-in power path management, support side-loading
  • Support load high current line compensation function
  • Adaptive charge current regulation to match all adapters
  • Charging voltage accuracy: ±0.5%
  • Support 4.20/4.30/4.35/4.40V battery
  • Support 4,3,2,1 LED power display
  • Button boot
  • Automatically detect phone insertion and removal
  • Low power consumption
  • Intelligent identification of load, automatic standby
  • Standby power consumption is less than 100 μA
  • Multiple protection, high reliability
  • Output overcurrent, overvoltage, short circuit protection
  • Input overvoltage, overcharge, overdischarge, overcurrent discharge protection
  • Machine over temperature protection
  • ESD 4KV, instantaneous withstand voltage 12V

Gallery

Mechanical Drawing

How to setup

LED light status definition

Package include

  • 1* UPS for Raspberry Pi 3B/3B Plus
  • 4* M2.5* copper stick
  • 4* M2.5 screws
  • 4* M2.5* long copper stick
  • 4* M2.5 nuts
  • 1* Acrylic shield
  • 1* Instuctions

Keywords

  • battery, 18650, lipo battery, UPS, current, power supply