EP-0142
Screw Terminal Hat for Arduino UNO
Description
This is a screw terminal expansion board specially designed for arduino UNO board expansion, through which you can quickly build your own circuit, and the pre-soldered ICSP interface makes it more convenient for you to burn arduino firmware. The screw terminals are provided with good labels for easy identification.you can use a 40-pin FRC (Flat Ribbon Cable) connector cable to connect all Arduino Uno pins to peripherals. With power on LED indicating.Blue reset button on the side. Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
Features
- Easy to install
- Fit for Arduino UNO ONLY
- Screw Terminal
- Nice Label Marker
- Pre-soldered ICSP Pin Header
- 40Pin 2x20 2.54mm Horn Socket Connector onboard
Gallery
- Product Outlook
- Dimension Detials
- Pre-solderd 6Pin ICSP Pin Header
Front view and Back view
Schematic diagram
Application Scenario
How to Assemble it
- Fix Copper Pillar with M2.5 nuts.
- Mount sheild on Arduino UNO Board (Not include in the package)and fix it with M2.5 screws.
- Build Circuit just unlease the screws on the terminal and insert the wire and fix it.
Package Includes
- 1 x Screw Terminal Hat for Arduino UNO
- 4 x M2.5 Copper Pillar
- 4 x M2.5x6 Screw
- 4 x M2.5 nut
Keywords
- Screw Terminal Hat for Arduino UNO, arduino hat, arduino hat with horn socket connector, Screw terminal, screw terminal with horn socket