S-0018: Difference between revisions
Line 54: | Line 54: | ||
* Datasheet: [[ File:SSD1315 2R.pdf ]] | * Datasheet: [[ File:SSD1315 2R.pdf ]] | ||
* Drive-1306: [[ File:Drive-1306.pdf ]] | * Drive-1306: [[ File:Drive-1306.pdf ]] | ||
==How to program it== | |||
===Raspberry Pi=== | |||
* | |||
===Raspberry Pi Pico=== | |||
* | |||
===Arduino=== | |||
* | |||
===STM32=== | |||
* | |||
===51 Series=== | |||
* | |||
==Package Includes== | |||
* 1 x 0.96 inch OLED display kit | |||
==Keywords== | |||
* 0.96 inch OLED display, double color 0.96 inch OLED display |
Revision as of 13:33, 14 July 2022
Double Color 0.96 Inch OLED Display
Descriptions
SSD1315 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons. This IC is designed for Common Cathode type OLED/PLED panel.
SSD1315 displays data directly from its internal 128 x 64 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable I2C Interface, 6800-/8080- series compatible Parallel Interface or Serial Peripheral Interface.
The 256 steps contrast control and oscillator which embedded in SSD1315 reduces the number of external components. SSD1315 is suitable for portable applications requiring a compact size and high output brightness, such as set-top box, car audio, wearable electronics, etc.
Features
- Resolution: 128 x 64 dot matrix panel
- Power supply 3.3V
- Segment maximum source current: 240uA
- Common maximum sink current: 30mA
- Embedded 128 x 64 bit SRAM display buffer
- Pin selectable MCU Interfaces:
- 8 bits 6800/8080-series parallel Interface
- 3/4 wire Serial Peripheral Interface
- I2C Interface
- Screen saving continuous scrolling function in both horizontal and vertical direction
- Screen saving infinite content scrolling function
- Internal or external IREF selection
- Internal charge pump regulator
- RAM write synchronization signal
- Programmable Frame Rate and Multiplexing Ratio
- Row Re-mapping and Column Re-mapping
- Power On Reset (POR)
- Dynamic Grayscale
- On-Chip Oscillator
- Chip layout for COG, COF
- Wide range of operating temperature: -40°C to 85°C
Basic Specifications
Display Specifications
- 1) Display Mode: Passive Matrix
- 2) Display Color: Yellow and Blue
- 3) Drive Duty: 1/64 Duty
Mechanical Specifications
- 1) Outline Drawing: According to the annexed outline drawing
- 2) Number of Pixels: 128x64
- 3) Panel Size: 27.50x27.80x3.0 (mm)
- 4) Active Area: 21.744x10.864 (mm)
- 5) Pixel Pitch: 0.17x0.17 (mm)
- 6) Pixel Size: 0.154x0.154 (mm)
- 7) Weight: 6(g)
Development Documentation
- Datasheet: File:SSD1315 2R.pdf
- Drive-1306: File:Drive-1306.pdf
How to program it
Raspberry Pi
Raspberry Pi Pico
Arduino
STM32
51 Series
Package Includes
- 1 x 0.96 inch OLED display kit
Keywords
- 0.96 inch OLED display, double color 0.96 inch OLED display