Raspberry Pi GPIO Breakout Board Big Black (T-Type) SKU: EP-0094

From 52Pi Wiki
Revision as of 15:59, 4 September 2018 by Yoyojacky (talk | contribs) (Gallery)
Jump to navigation Jump to search

Raspberry Pi GPIO Breakout Board Big Black(T-Type)



It is a breatout board for your Raspberry Pi's GPIO experiment.
It based on T type breakout board and made some changes, the board is fit for your breadboard perfectly.
And it compatiable for Raspberry Pi 2B/2B+/3B/3B+/Zero/ZeroW.


  • Smaller than before
  • fit for GPIO experiment
  • Clear GPIO function definitions shown
  • BCM named GPIO lable
  • Plug and Play
  • Easy to assemble
  • Weight: 0.085kg

How to assemble

  • 1. Connect the 40Pin wire to GPIO breakout board.
    • Please make sure the white wire connect to the pin holder, there is a trangle mark on the board.

    • Please make sure the white trangle against to the trangle mark which is on the 40 Pin wire.
  • 2. Connect the 40 Pin wire to your Raspberry Pi's GPIO, please make sure the white wire conncect to you Pi's GPIO Pin 1(3.3v)
  • 3. Connect the GPIO Breakout baord to the center of breadboard.

  • 4. (Optional) Remove the protect film on breadboard and paste it to the project board.



Package Include

  • 1 x Big Black T Type Breakout Board
  • 1 x 40Pin Wire Cable