RPI-595-IO-Expand Module(English)

From 52Pi Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

RPI-595-IO-Expand Module

Description

The "RPI-595-IO-Expand Module" uses four 74HC595 chips to expand IO ports up to 32.In this case ,this module can solve the problem in Raspberry Pi like enlightening LED matrix,driving the lattice screen ,or in any situation ,that IO port insufficient

Technical Details

Type Value
Name RPI-595-IO-Expand Module
Working voltage 2.4V-5V
IO voltage 3.3V
Number of IO Expanded 32
Communicate interface SPI
Maximum communicate speed 100MHZ
Input and Output 8-bit serial input and 8-bit serial or parallel output

Product Scale


File:595 sch01.png

schematic


File:595 sch02.png

Learn

how to use this 595-IO-Expand Module to enlighten our RGB-LED-Matrix Module RPI-RGB-LED-Matrix?

  • just mount the LED Matrix module on 595-IO-Expand module like following picture
  • install wiringPi library you can refer from this link http://wiringpi.com/download-and-install/
  • After installing wiringPi, type the following code in the console to build a .c file

sudo vim.tiny RGB8x8.c
File:8x8 tech2.png

  • Copy and paste the following demo code into RGB8x8.c


File:8x8 tech1.png

  • Under the vim.tiny editor, type ":", then type "wq" and press "enter" to save the RGB8x8.c file and exit editor


File:8x8 tech4.png

  • Complie it: gcc RGB8x8.c -lwiringPi -o RGB8x8


File:8x8 tech3.png

  • Lastly, type sudo ./RGB8x8 -g 0 1,to load the executable file ,and in the matrix board you will find the green LED on line 0,row 1 is turned on as the following photo shows.


File:8x8 tech5.png

示例代码说明

#include "OLEDType_SSD1306.h"  //include driver file
#include "OLED_GFX.h"          
#include "OLED_SSD1306.h"

OLED_SSD1306 display;                                                              // instantiation  OLED_SSD1306

const unsigned char rpi_2[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */           //binary file of picture
0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X07,0XC1,0XF0,0X00,0X18,0X32,0X06,0X00,
0X10,0X0C,0X02,0X00,0X11,0X0C,0X02,0X00,0X10,0X4C,0X84,0X00,0X08,0X2D,0X04,0X00,
0X0C,0X1E,0X08,0X00,0X06,0X3F,0X10,0X00,0X03,0XE1,0XF0,0X00,0X04,0X40,0X18,0X00,
0X08,0XC0,0X88,0X00,0X09,0XFF,0XE4,0X00,0X0F,0X1C,0X34,0X00,0X1E,0X0C,0X1E,0X00,
0X24,0X0C,0X12,0X00,0X24,0X0C,0X01,0X00,0X24,0X0C,0X11,0X00,0X26,0X1E,0X19,0X00
0X2F,0XE1,0XFB,0X00,0X1B,0XC0,0XE6,0X00,0X10,0XC0,0XC6,0X00,0X10,0XC0,0X84,0X00,
0X08,0X40,0X84,0X00,0X08,0X73,0X0C,0X00,0X06,0X7F,0X98,0X00,0X01,0XC0,0XE0,0X00,
0X00,0XC0,0XC0,0X00,0X00,0X33,0X00,0X00,0X00,0X0C,0X00,0X00,0X00,0X00,0X00,0X00,
};

unsigned char rpi_3[128] = { /* 0X00,0X01,0X1A,0X00,0X20,0X00, */               //binary file of picture
0XFF,0XFF,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,0XF8,0X3E,0X0F,0XC0,0XE7,0XCD,0XF9,0XC0,
0XEF,0XFB,0XFD,0XC0,0XEE,0XF3,0XFD,0XC0,0XEF,0XB3,0X7B,0XC0,0XF7,0XD2,0XFB,0XC0,
0XFF,0XE1,0XFF,0XC0,0XFD,0XC0,0XEF,0XC0,0XFC,0X1E,0X0F,0XC0,0XFB,0XBF,0XE7,0XC0,
0XF7,0X3F,0X77,0XC0,0XF6,0X00,0X1B,0XC0,0XF0,0XE3,0XCB,0XC0,0XE1,0XF3,0XE1,0XC0,
0XDB,0XF7,0XFD,0XC0,0XDB,0XF3,0XFE,0XC0,0XDB,0XF3,0XEE,0XC0,0XD9,0XE1,0XE6,0XC0,
0XD0,0X1E,0X04,0XC0,0XE4,0X3F,0X19,0XC0,0XEF,0X3F,0X39,0XC0,0XFF,0XBF,0X7B,0XC0,
0XF7,0XBF,0X7B,0XC0,0XF7,0X8C,0XF3,0XC0,0XF9,0X80,0X67,0XC0,0XFE,0X3F,0X1F,0XC0,
0XFF,0X3F,0X3F,0XC0,0XFF,0XDC,0XFF,0XC0,0XFF,0XF3,0XFF,0XC0,0XFF,0XFF,0XFF,0XC0,
};

int main(int argc, char **argv)
{
	if ( !display.init(OLED_I2C_RESET,OLED_OLED_I2C_128x32) )       //initiate the I2C interface screen ,otherwise ,exit
		exit(EXIT_FAILURE);                                     
	display.begin();                                                //start display
	display.clearDisplay();                                         //clear screen
	display.drawBitmap(0,0,rpi_2,32,32,1);                          //picture display location X:0,Y:0,picture file :RPI_2,picture high:32,picture with:32,font:black
	display.drawBitmap(96,0,rpi_2,32,32,1);                         //picture display location X:96,Y:0,picture file :RPI_2,picture high:32,picture with:32,font:black
	display.drawRect(0,0,128,32,0);                                 //display white          
	display.setTextSize(1);                                         //set font size one
	display.setTextColor(WHITE);                                    //set font color white
	display.setCursor(29,0);                                        //set character display location X:29,:Y:0
	display.print("Hello World");                                   //set display content Hello World
	display.setCursor(29,16);                                       //set ddisplay location X:29,Y:16
	display.print("www.52pi.cn");                                   //set display ccontent www.52pi.cn
	display.display();                                              //start display
        usleep(10000);                                                  //delay

}

购买链接

附件


1306-0.91-CODE.zip
SSD1306-Revision 1.0.pdf Category:名称
如对此页的规则或教程有意见者,可到此网页或是在管理员Powup333的讨论页留言。