S-0007
Jump to navigation
Jump to search
0.91 Inch OLED Module
Description
This display is made of 128x32 individual OLED pixels.
Drived by SSD3306 chip, communicate with Raspberry pi or Arduino series products via I2C protocol.
Compatible with most of MCU which support I2C protocol support.
There are mounting hole and female pin header on the PCB, so that you can fixed it to Raspberry Pi with screws and nuts.
Features
- Easy to use
- Low power consumption
- Easy to assemble and fixed
- Less GPIO pin occupation
Specifications
- Resolution: 128 x 32
- Work Voltage: 3.3V
- Communication Protocol: I2C
- FP frequency: less than 1 fps
- Wide range of operating temperature: -40°C to 85°C
Dimension
Gallery
 |
 |
 |
 |
 |
 |