P-0003: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Created page with "==5V-4A EU-Standard== ==Description== ==Features== ==Gallery== ==Package Includes== ==Keywords== * Power supply, raspberry pi 4B,5v/4A, EU-standard")
 
m (Yoyojacky moved page 5V-3A EU-Standard SKU:P-0003 to P-0003)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
==5V-4A EU-Standard==
==5V-4A EU-Standard==
[[File:欧标 5V 3A.jpg|right|300px]]
==Description==
==Description==
==Features==
The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply
provides 15W continuous output power. The power supply shall meet the RoHS requirements.
==Specifications==
===Input Characteristics===
* Input Voltage & Frequency
{| class=wikitable
|-
! Parameters !!Minimum !!Rating !! Maximum
|-
|Input Voltage|| 90Vac || 100Vac~240Vac|| 264Vac
|-
|Input Frequency|| 47Hz|| 60Hz/50Hz|| 63Hz
|}
* Inrush Current (cold start @ 230V AC) No damage for 220V/50Hz at cold start (25℃).
* Average Efficiency: Standby power <0.1W @ 230VAC/50Hz.
* Cooling: Natural convection.
* Mean Time Between Failure(MTBF):The MTBF for the power adapter shall equal or exceed 10,000 hours when operated at full rated load in an
ambient temperature of 25 degree C.
* Output Characteristics:
{| class=wikitable
|-
! RATED OUTPUT !!colspan="2" |Rated Load !!Remark
|-
|                      || Min. || Max.||
|-
|Output Voltage(unload)||<font color=red> 4.9V</font> ||<font color=red>  5.3V</font> ||
|-
|Output Voltage(Full load) || <font color=red>4.9V</font>|| <font color=red> 5.3V</font>|| with wire testing
|-
|Output Current|| 0A || 3A ||
|-
|Turn - on Delay Time|| / ||  3S ||
|-
|Hold-up Time || 5mS || / ||
|-
|Ripple & Nosic ||/  ||150mVp-p||
|-
|OCP ||  || ||
|}
<pre>Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic
capacitor and a 47uF electrolysis capacitor. </pre>
===Protection Requirements===
* Over Current Protection:OCP Point Limited: 110%-200% auto restart
<pre>
The output shall hiccup when the over current applied to the output , and shall be self-recovery when the fault
condition is removed
</pre>
*  Short Circuit Protection:
<pre>
The input power shall decrease when the output is short to GND, the power supply shall not damage, and shall be
self-recovery when the fault condition is removed
</pre>
==Environment Requirements==
* Operating Temperature and Relative Humidity
0℃ to +40℃ 20%RH to 80%RH @ Sea level shall below or no more than2000M
* Storage Temperature and Relative Humidity
-30℃ to +70℃ 10%RH to 90%RH(non-condensing)@ Sea level shall below 10000M
* Vibration
10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular
axes X, Y, Z
* EMC Standards & Safety Standards
<strong>EN55032</strong>
* Safety Standards
{| class=wikitable
|-
!Type !!Country !!Standard
|-
| Europe || CE|| EN62368
|}
* Ielectric Strength(Hi-pot)
Primary to Secondary: 3000Vac / 10mA / 60 seconds (3 seconds for production)
* Leakage Current
0.25mA max. at 240Vac / 50Hz input
* Insulation Resistance
100MΩ min. @ primary to secondary add a 500Vdc test voltage
* Reliability Requirements
**Burn-in: The power supply shall be burn-in for 2 Hours under normal input and 80% rated load.
* Testing Equipment
{| class=wikitable
|-
!NO.!! Testing Equipment !! Model!! Remark
|-
|1 ||AC Source ||TDGC-2 ||
|-
|2 ||Power Meter || PF9810 ||
|-
|3 ||Electronic Load || M9715||
|-
|4 ||Oscilloscopes || MDO3014||
|-
|5 ||Digital Multimeter || VC890||
|-
|6 ||DC Power || IT6721||
|-
|7 ||HI-POT Tester || LK2627X||
|-
|8|| Cons. T/H Simulator || XINBAO ||
|}
==Gallery==
==Gallery==
{|
|[[File:欧标 5V 3A.jpg|left|320px]]
|[[File:欧标3.jpg|none|320px]]
|[[File:转换头.jpg|none|320px]]
|}
==Package Includes==
==Package Includes==
* 1 x 5V-3A EU-Standard power supply
* 1 x USB-C to MicroUSB convertor
==Certificates File Download==
{| class=wikitable
|-
!Type!!Download URL
|-
|CE-emc || [ https://wiki.52pi.com/index.php/File:CE-emc.pdf ]
|-
|CE-LVD || [ https://wiki.52pi.com/index.php/File:CE-LVD-TUV.pdf ]
|-
|cTUVus || [ https://wiki.52pi.com/index.php/File:CTUVus.pdf ]
|-
|FCC|| [ https://wiki.52pi.com/index.php/File:FCC.pdf ]
|-
|GS || [ https://wiki.52pi.com/index.php/File:GS.pdf ]
|-
| 5V-3A EU-Standard  || [ https://wiki.52pi.com/index.php/File:5V3A_EU-Adapter-powersupply.pdf ]
|}
==Keywords==
==Keywords==
* Power supply, raspberry pi 4B,5v/4A, EU-standard
* Power supply, raspberry pi 4B,5v/4A, EU-standard

Latest revision as of 20:04, 27 August 2021

5V-4A EU-Standard

欧标 5V 3A.jpg

Description

The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 15W continuous output power. The power supply shall meet the RoHS requirements.

Specifications

Input Characteristics

  • Input Voltage & Frequency
Parameters Minimum Rating Maximum
Input Voltage 90Vac 100Vac~240Vac 264Vac
Input Frequency 47Hz 60Hz/50Hz 63Hz
  • Inrush Current (cold start @ 230V AC) No damage for 220V/50Hz at cold start (25℃).
  • Average Efficiency: Standby power <0.1W @ 230VAC/50Hz.
  • Cooling: Natural convection.
  • Mean Time Between Failure(MTBF):The MTBF for the power adapter shall equal or exceed 10,000 hours when operated at full rated load in an

ambient temperature of 25 degree C.

  • Output Characteristics:
RATED OUTPUT Rated Load Remark
Min. Max.
Output Voltage(unload) 4.9V 5.3V
Output Voltage(Full load) 4.9V 5.3V with wire testing
Output Current 0A 3A
Turn - on Delay Time / 3S
Hold-up Time 5mS /
Ripple & Nosic / 150mVp-p
OCP
Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic
capacitor and a 47uF electrolysis capacitor. 

Protection Requirements

  • Over Current Protection:OCP Point Limited: 110%-200% auto restart
The output shall hiccup when the over current applied to the output , and shall be self-recovery when the fault
condition is removed 
  • Short Circuit Protection:
The input power shall decrease when the output is short to GND, the power supply shall not damage, and shall be
self-recovery when the fault condition is removed 

Environment Requirements

  • Operating Temperature and Relative Humidity

0℃ to +40℃ 20%RH to 80%RH @ Sea level shall below or no more than2000M

  • Storage Temperature and Relative Humidity

-30℃ to +70℃ 10%RH to 90%RH(non-condensing)@ Sea level shall below 10000M

  • Vibration

10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z

  • EMC Standards & Safety Standards

EN55032

  • Safety Standards
Type Country Standard
Europe CE EN62368
  • Ielectric Strength(Hi-pot)

Primary to Secondary: 3000Vac / 10mA / 60 seconds (3 seconds for production)

  • Leakage Current

0.25mA max. at 240Vac / 50Hz input

  • Insulation Resistance

100MΩ min. @ primary to secondary add a 500Vdc test voltage

  • Reliability Requirements
    • Burn-in: The power supply shall be burn-in for 2 Hours under normal input and 80% rated load.
  • Testing Equipment
NO. Testing Equipment Model Remark
1 AC Source TDGC-2
2 Power Meter PF9810
3 Electronic Load M9715
4 Oscilloscopes MDO3014
5 Digital Multimeter VC890
6 DC Power IT6721
7 HI-POT Tester LK2627X
8 Cons. T/H Simulator XINBAO

Gallery

欧标 5V 3A.jpg
欧标3.jpg
转换头.jpg

Package Includes

  • 1 x 5V-3A EU-Standard power supply
  • 1 x USB-C to MicroUSB convertor

Certificates File Download

Type Download URL
CE-emc [ https://wiki.52pi.com/index.php/File:CE-emc.pdf ]
CE-LVD [ https://wiki.52pi.com/index.php/File:CE-LVD-TUV.pdf ]
cTUVus [ https://wiki.52pi.com/index.php/File:CTUVus.pdf ]
FCC [ https://wiki.52pi.com/index.php/File:FCC.pdf ]
GS [ https://wiki.52pi.com/index.php/File:GS.pdf ]
5V-3A EU-Standard [ https://wiki.52pi.com/index.php/File:5V3A_EU-Adapter-powersupply.pdf ]

Keywords

  • Power supply, raspberry pi 4B,5v/4A, EU-standard