From 52Pi Wiki
Revision as of 18:28, 27 August 2021 by Yoyojacky (talk | contribs) (Yoyojacky moved page AC8265 Wireless NIC 2.4G/5G WiFi Bluetooth 4.2 for Jetson Nano SKU: L-0031 to L-0031)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

AC8265 Wireless NIC 2.4G/5G WiFi Bluetooth 4.2 for Jetson Nano



This is a dual mode wireless NIC module applicable for Jetson Nano, supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2.
The metal case is not included in this kit.


  • Chip: Intel 8265AC
  • Bands: 2.4GHz / 5GHz
  • Speed: 300Mbps / 867Mbps
  • WiFi protocol: 802.11ac
  • Bluetooth version: 4.2
  • NIC interface: NGFF (M.2)
  • Antenna interface: IPEX connector
  • Supported OS: Linux, Windows 10/8.1/8/7
  • Dimensions: 22mm × 30mm × 2.4mm

Product Gallery


Application Gallery

JETNIC 1.jpg

Package Includes

  • 1 x Wireless-AC8265
  • 2 x High Quality Antenna
  • 2 x IPEX to SMA cable
  • 1 x M2 Screw
  • 1 x Metal Bracket

How to Assemble

  • 1.Remove the two screws on Jetson Nano,detach the Jetson Nano.
  • 2.Connect the extension cable to Wireless-AC8265 on IPEX connector , tighten the nut and washer to each SMA connector
  • 3.Remove the NIC screw onboard, insert the Wireless-AC8265 into the M.2 socket , screw it tightly.
  • 4. Insert the Jetson Nano into the socket and screw it again , connect the antennas


  • Q: How about the signal strength when using this IPEX cable with antenna?
 A: It is much better than without an antenna.
  • Q: Is it easy to assemble?
 A: Yes, just several screws. 
  • Q: Is it better to work with a metal case and where can I find the case's descriptions?
 A: Yes, absolutely it will work find with a metal case due to the antenna need to fix to metal case. please refer to this URL: Aluminum Case for Jetson Nano 


  • AC8265 Wireless, NIC, 2.4G/5G, WiFi,Bluetooth 4.2, Jetson Nano, antenna