K-0592

Mini Tower Kit(3D Printing)

Description

This is a 3D printed Case for Raspberry Pi 4B and UPS PLUS. The material of case is made of PLA, and the side is made of transparent acrylic material. Ice tower cooler can be placed into the case with Raspberry Pi 4B and UPS Plus. The 0.96 inch OLED screen provided in kit can display the running status of Raspberry Pi or UPS Plus through programming.

 Note: Since the case is printed by FDM 3D printer and is made of PLA material, the surface of the case will have a little roughness, which is normal and does not affect the use. If necessary, you can polish it by yourself.

 Raspberry Pi 4B does not include in the package!!

Features

• Support Raspberry Pi 4B only
• Easy to assemble
• Support OLED display
• Support UPS Plus integration
• Support ICE Tower Cooler integration
• Good appearance
• Compact mini

Gallery

• Product Outlook

• Definition of Ports

• Application Scenario

Package Includes

• 1 x 3D printing Case
• 2 x Acrylic side panel
• 2 x 0.96 inch OLED Display and jumper wires
• 1 x UPS Plus Module with screws and copper pillars
• 1 x Low profile Ice tower cooler kit

How to assemble

• 1. Fix the copper pillar to 3D printing case.
• 2. Fix UPS Plus with short copper pillar.
• 3. Fix Raspberry Pi 4B with short copper pillar and make sure the pogopin is against to the GPIO Pin.
• 4. Fix the metal bracket of low profile ice tower cooler with M2.5 screws.
• 5. Fix low profile ice tower cooler to Raspberry Pi with M2.5 screws.
• 6. Fix 0.96 inch OLED display to the case with glue gun or tape, and connect the pins to GPIO according to the wiki's circuit diagram.
• 7. Fix two side with acrylic panel with screws.
• 8. You can also fix the fan to the arcrylic panel on the side.

How to enable display

• Please refer to this URL: [ https://wiki.52pi.com/index.php/0.96_Inch_OLED_Module_SKU:_S-0005 ]

Keywords

• Mini Tower Kit(3D Printing), UPS case, ice tower case, case for raspberry pi 4B.