Difference between revisions of "K-0583"

From 52Pi Wiki
Jump to navigation Jump to search
(How to assemble)
(How to connect Fan)
Line 29: Line 29:
==How to connect Fan==
==How to connect Fan==
<br style="clear:both;">
<br style="clear:both;">
==Package Includes==
==Package Includes==
* 1 x Transparent Plastic shell
* 1 x Transparent Plastic shell

Revision as of 16:22, 17 May 2021

Transparent Plastic Shell Kit for RPi 3B/3B+ (EU)



This is a transparent plastic shell compatible with Raspberry Pi 3B and 3B+. The kit contains a heat sink and a 3007 transparent fan with screws, Power supply is European standard 5V/2.5A switching power supply. It fit for Raspberry Pi 3B and 3B+.


  • Easy to assemble
  • Transparent Plastic shell
  • Transparent Fan
  • Power supply with switch
  • Includes copper heat sink pack


  • Product Outlook

How to assemble

  • 1. Fix 3007 Fan to upper case.
  • 2. Paste heat sinks to Raspberry Pi after peeling off protection film.
  • 3. Connect the fan to GPIO 5V and GND Pin and fix Raspberry Pi to bottom case with screws.
  • 4. Close the upper case to bottom case and insert TF card to card slot and connect power supply.

How to connect Fan


Package Includes

  • 1 x Transparent Plastic shell
  • 1 x EU-Standard 5V/2.5A Power supply with Switch button
  • 1 x Screw driver
  • 1 x Transparent 3007 Fan
  • 1 x Copper Heat sink pack
  • 4 x M2.5 long screw (for fixing fan)
  • 4 x M2.5 Nut (for fixing fan)
  • 4 x Self-tapping screws (for fixing Raspberry Pi)


  • Transparent Plastic Shell Kit for RPi 3B/3B+ (EU), EU-Standard Power supply, Raspberry Pi 3B/3B+ plastic case.