EZ-0024

From 52Pi Wiki
Jump to navigation Jump to search

GPS Module SKU:EZ-0024

Description

GPSEZ1.jpg
GPSEZ2.jpg
GPSEZ3.jpg
GPSEZ5.jpg


The module uses U-BLOX NEO-6M module.The module comes with high-performance ceramic antenna, which is equival of the integrated active antenna.
Module comes with EEPROM. All configuration information can be stored in the EEPROM. A variety of configurations to meet your needs.
The module also comes with a rechargeable backup battery (to support warm or warm start. after the main power supply power off, back-up battery power can maintain a half hour for GPS receiver data stored).


Features

  • Using U-BLOX NEO-6M module , compact size , excellent performance.
  • Comes with ceramic antenna , strong star search capability .
  • Various parameters can be set via the serial port , and can be stored in the EEPROM, easy to use.
  • Compatible with 3.3V / 5V level for easy connection to a variety of microprocessor systems.
  • Comes with a rechargeable battery back-up , power-down can keep the ephemeris data.

Technical Parameters

Parameters Value
Power Supply 3V/5V
Model GPS-NEO-6M-001
Antenna ceramic antenna
Battery rechargeable battery back-up
Signal light LED light
Antenna size 25*25mm
Model size 25.5mm*31.5mm
Mounting Hole 2mm
The default baud rate 38400
The default output Compatible with NMEA0183 protocol

Notice

  • Outdoor use
  • Note Lightning and waterproof
  • Do not support Raspberry Pi 3 B (Because of RPi 3B's serial port problem, it may have other solution)

Package includes:

  • 1x GPS module

How to wire up

It can be just wire to your Raspberry Pi B/B+/2B's GPIO Pin, TxD and RxD as following picture:

GPSEZ4.jpg



How to use


Purchase Links

Shopping car.png

52Pi Store