EZ-0105

Descriptions

The X735 V3.0 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40-pin header. It provides 6~30V wide operating input range, intelligent and safe power management, safe shutdown and full poweroff through software, an automatic temperature controlled PWM fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The X735 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.

Features

FOR USE WITH

• Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B

OPERATING SYSTEM

• Raspberry Pi OS
• Safe shutdown function tested for Raspberry Pi official OS, other operating systems to be tested and advised

KEY FEATURES

• Intelligent and safe power management
• On-board button to control power on, reboot and safe shutdown
• On-board LED shows the status of power on, reboot and shutdown
• Supports safe shutdown and full poweroff through software
• Jumper setting for Auto power-on
• Integrated high-efficiency step-down DC-DC converter
• Wide 6V to 30V operating input range
• Deliver up to 5.5A output current
• Integrated high-performance MOSFET power switch to lower power loss

• Powers the Raspberry Pi via the 40-pin header - no cabling required
• Convenient power input : DC jack, Type-C connector , Micro-USB socket and XH2.54 connector
• Allows to power other devices via XH2.54 socket and the 40-pin header
• Allow using external momentary button and DIY your perfect case

• Dedicated PWM cooling fan for Raspberry Pi
• Air flow up to 6.01CFM and maximum speed of 5000 RPM
• Smooth PWM adjustment provides a quiet experience
• Real-Time fan speed reading
• Programmable temperature and fan speed

• Reserved 40-pin stackable Header for Add-On Boards
• Works with all current models of the Raspberry Pi using a 40 pin header
• Fully compatible with X8 series storage boards to provide safe power management

SPECIFICATION

• Power supply: 5Vdc +/-5%，≥3A via Type-C / Micro-USB power socket 6~30Vdc ≥2A via power jack (5.5x2.1mm)
• Board size: 65 x 58mm

NOTES

Do not apply power to your Raspberry Pi via the Pi's Micro-USB socket or type C socket

Package Includes

• 1 x X735 V3.0 Power mgt Board
• 8 x Screw M2.5 *5mm
• 4 x Spacer F/F M2.5 *12mm
• 4 x Spacer F/F M2.5 *12mm
• 1 x Jumper link

Keywords

• X735 Power Management Board, X735, Power management Board, Raspberry Pi power management