EZ-0077: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==X852 Dual MSATA SSD Shield== ===Description=== X852 Dual MSATA SSD Shield allows you put two MSATA SSD on board, and you can boot from the MSATA SSD drive. * FOR USE WITH <...") |
|||
Line 20: | Line 20: | ||
* LED blue indicator indicates drive status | * LED blue indicator indicates drive status | ||
* Fully compatible with X735 for intelligent and safe power management | * Fully compatible with X735 for intelligent and safe power management | ||
===Specification== | ===Specification=== | ||
* Power supply: 5.1Vdc +/-5% , 4A | * Power supply: 5.1Vdc +/-5% , 4A | ||
* DC jack: 5.5x2.5mm | * DC jack: 5.5x2.5mm | ||
Line 46: | Line 46: | ||
|Screw M2.5 x 6mm || 10 | |Screw M2.5 x 6mm || 10 | ||
|} | |} | ||
==Optional Accessories== | ==Optional Accessories== | ||
===Power Supply Unit=== | ===Power Supply Unit=== |
Revision as of 14:59, 11 June 2019
X852 Dual MSATA SSD Shield
Description
X852 Dual MSATA SSD Shield allows you put two MSATA SSD on board, and you can boot from the MSATA SSD drive.
- FOR USE WITH
Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+
- OPERATING SYSTEM
All Raspberry Pi operating systems
Features
- Ideal storage solution for Raspberry Pi - Dual MSATA SSD Shield
- Supports up to 4TB MSATA solid-state drive (SSD)
- Supports 2 MSATA SSD working at the same time
- Supports operating system installation and booting from your SSD
- Provides additional 2 USB ports for Raspberry Pi
- Powers the Raspberry Pi via on-board XH2.54 connector - Only one power adapter required
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
- Integrated USB 3.1 Gen 1 Hub Controller
- USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
- Quick file transfer with high-speed USB3.0 5Gb/s connectivity from a PC or a Mac
- Specially-made USB3.0 jumper to connect with Raspberry Pi - no additional cables needed
- LED blue indicator indicates drive status
- Fully compatible with X735 for intelligent and safe power management
Specification
- Power supply: 5.1Vdc +/-5% , 4A
- DC jack: 5.5x2.5mm
- USB socket: USB 3.0 type A
- Power input / output connector: XH2.54 2-pin
- PCB Size: 107.5mm x 85mm
Notes
- For use with original power supply unit only
- WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and micro-USB socket at the same time.
Package Includes
Product name | Quantity |
---|---|
X852 SSD expansion board | 1 |
USB3.0 Jumper | 1 |
USB 3.0 A-Male to A-Male Data cable | 1 |
2-Pin Power Connection Wire | 1 |
Spacer M/F M2.5 x 12mm | 4 |
Screw M2.5 x 6mm | 10 |
Optional Accessories
Power Supply Unit
- AC 100 - 240V input
- 5Vdc 4A output
- W/ EU and US plug
- 5.5*2.5 DC plug
- 1.2M cable w/ magnet ring
We are recommended you using this power adapter due to it can provide 5V/4A for your device.