EXB EoF-002
Jump to navigation
Jump to search
Raspberry Pi Expansion Board
Description
This GPIO Prototyping Board is Designed for Raspberry Pi B+ and Pi 2 . you can combine your raspberry pi with other components, modules in this board .it's very convenient
Compatibility List
- Compatibility
Platform | RPi Expansion Board | Notes |
---|---|---|
Raspberry Pi 3 Model B Plus | √ | |
Raspberry Pi zero | √ | |
Raspberry Pi zero W | √ | |
Raspberry Pi 3 Model B | √ | |
Raspberry Pi 2 Model B | √ | |
Raspberry Pi Model B+ | √ |
Produce Features
- A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.
- Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips so you can easily connect to them.
- On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
- There's also a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
- A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
- EEPROM for Raspberry Pi HAT
- POWER LED indicator
product scale
schematic
mounting introduction
Just insert the module to Raspberry Pi, like the below picture: