EXB EoF-002

From 52Pi Wiki
Revision as of 18:56, 27 August 2021 by Yoyojacky (talk | contribs) (Yoyojacky moved page Raspberry Pi Expansion Board(English) to EXB EoF-002)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Raspberry Pi Expansion Board


This GPIO Prototyping Board is Designed for Raspberry Pi B+ and Pi 2 . you can combine your raspberry pi with other components, modules in this board .it's very convenient

RPI eexxpansion 01.jpg

Compatibility List

  • Compatibility
Platform RPi Expansion Board Notes
Raspberry Pi 3 Model B Plus
Raspberry Pi zero
Raspberry Pi zero W
Raspberry Pi 3 Model B
Raspberry Pi 2 Model B
Raspberry Pi Model B+

Produce Features

  • A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.
  • Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips so you can easily connect to them.
  • On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
  • There's also a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
  • A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
  • EEPROM for Raspberry Pi HAT
  • POWER LED indicator

product scale



Expansion board schematic.png

mounting introduction

Just insert the module to Raspberry Pi, like the below picture: