EP-0115: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
Line 10: Line 10:
STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED!!!<br>
STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED!!!<br>
The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment.
The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment.
Do not use this product in an enclosed case without active air circulation
</font>
</font>
<br>
<br>

Revision as of 17:21, 6 December 2019

Power-Over-Ethernet (PoE) HAT for RPi 4B/3B+

Description

The Power-over-Ethernet (POE) Module offers a convenient and cost-effective way to deliver power to your device.
The module allows you to put a DC voltage onto specific pairs of the Ethernet cable so that devices connected to the network can use it as a power source.
The module is ideal for any space limited PoE applications such as IP cameras, biometric readers, RFID, wireless access points, HDBaseT extenders, VOIP phones, networked audio etc.
It's tiny size is a perfect match to the Raspberry Pi 4B and 3B+ in IOT and building automation applications. It is ultimate power solution for Raspberry Pi 4B/3B+.
It delivers clean and reliable power to the latest Pi 4.

Warning: PoE power output must be within the budget of the switch when powering multiple boards!!! STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED!!!
The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment. Do not use this product in an enclosed case without active air circulation

Features

Specifications

Gallery

Package Inclues

How to Use

Keywords

  • PoE module, Raspberry Pi 4B, Raspberry Pi 3B+, Power over ethernet