The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
ICE Tower Cooling Fan Black
Description
This ICE Tower Cooling Fan black is burned for solving heat dissipation problem too!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
Best of all, this super cooling fan support both Raspberry Pi 3B+ and the new Raspberry Pi 4B.
The fan has 7 different color LEDs that change automatically, making your fan more beautiful and personalized.
Features
- DC 5V Power in (Can be powered by the Raspberry Pi)
- Ice Tower Structure
- 5mm copper tube
- Super heat dissipation
- Rated power 0.4W @5V, 0.08A
- Super Cool fan background light (7 Colors)
- Easy to setup
- Compatible with Raspberry Pi 3B+/4B
- Plug and play
Dimensions
- The Dimensions is the same as ICE Tower CPU Cooling Fan.
Gallery
Raspberry Pi 4B
- It can be compatible with several acrylic case.
- Colorful case, Black & White, All black case.
Raspberry Pi 3B+
How to assemble
Raspberry Pi 3B+
- 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
- 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
- 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
- 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
Raspberry Pi 4B
- 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
- 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
- 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
- 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.
Package Include
- 1 x Ice Tower radiator and Fan
- 2 x Steel Mounting brackets
- 8 x M2.5x6 Copper sticks
- 4 x M2.5 Nuts
- 6 x M2.5x4 screws
- 3 x Thermal Tape
- 1 x Screw Driver
- 1 x Protective Acrylic Panel
PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.
FAQ
- Q: Can it be install to my retroflag case?
A: No, the dimension is too big.
- Q: How many degrees can be decreased ?
A: We've tested it at room temperature 25℃, it can decreased about 40℃.
- Q: Does it easy to assemble?
A: Yes, it is very easy to install, we've provided an instruction for you.
