EP-0108
Jump to navigation
Jump to search
DockerPi Motor Board(A) SKU:EP-0108
Description
DockerPi Motor Board(A) is a DockerPi series expansion board.It can control two 12V DC motors.
DockerPi Motor Board(A) can be used in Raspberry Pi.You could communicate with it by opening I2C.
DockerPi Motor Board(A) can be used only one,but it still can be stacked with other DockerPi expansion board.
If you need to run for a long time ,we recommend that you use our DockerPi Power expansion board to provide more power.
Features
- DockerPi Series
- Programmable
- Control directly(without progarmming)
- Extend GPIO Pins
- Two DC 12V motors
- Can stack with other stack board
Official Compatibility Test
Not only support the following development boards, other development boards can be compatible if they have I2C peripherals. (Note: some software changes may be required)
Platform | DockerPi Motor Board | Notes |
---|---|---|
Raspberry Pi All Platform | √ | Not Include CM Series & EOL Platform |
Gallery
Package Includes
Register Map
Configuring I2C(Raspberry Pi)
Run sudo raspi-config and follow the prompts to install i2c support for the ARM core and linux kernel
Go to Interfacing Options
then I2C
Enable!
Done!