EP-0106: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Created page with "==DockperPi Sensor Hub Development Board== ==Description== The Raspberry Pi module for obtaining environmental parameters in the Internet of Things.<br> It integrates various...")
 
Line 25: Line 25:
[[File:SensorhatMech2.png|left|600px]]
[[File:SensorhatMech2.png|left|600px]]
<br style="clear;both;">
<br style="clear;both;">
==How to use==
* Mount it on Raspberry Pi’s GPIO and enable I2C function.
* Open a terminal and typing :
<code>sudo raspi-config</code><br>
<pre>Navigate to interface options and then select i2c and enable it.</pre><br>
* Install smbus2 module (python3), please make sure your pi is connecting to internet.
* Typing this command in the terminal:
<code>sudo pip3 install smbus2</code><br>
* Run and test
<pre>chmod +x sensorhub.py
./sensorhub.py
</pre><br>
* C code compile and running (please make sure you have wiringPi library has already installed) 
<pre>gcc –o sensorhub sensorhub.c –lwiringPi
./sensorhub</pre><br>
* You will see the feedback as following picture.
[[File:Feedbacksensor.png|left|600px]]
<br style="clear:both;">
==Keywords==
SensorHub, Docker pi, raspberry pi, humidity, temperature, airpressure, NTC, pir sensor, DHT11, DHT12, light sensor.

Revision as of 16:12, 30 May 2019

DockperPi Sensor Hub Development Board

Description

The Raspberry Pi module for obtaining environmental parameters in the Internet of Things.
It integrates various environmental sensors: temperature sensors, humidity sensors, air pressure sensors, lighting and thermal imaging sensors.
You can use them in smart homes.
To obtain various parameters in life, these parameters can be processed to control the home reasonably and intelligently.
For example, the temperature of the temperature sensor can be used to control the heating device or the air conditioner.
The thermal imaging sensor can detect if someone is in the living room.

Features

  • Easy to use
  • Temperature Detection, Thermistor Detection Temperature Range – 30℃~127℃ DHT11 – 20℃~60℃ Plate-borne Temperature Sensor - 40℃~80℃.
  • Humidity detection, sensor detection range 20% RH ~ 95% RH
  • Light intensity detection, detection range: 0LUX~1800LUX
  • Pressure detection, detection range: 300 ~ 1100 hPa
  • Biopsy test (biopsy test with corresponding indicator), maximum detection angle of 100 degrees, maximum distance of 12mSupply voltage 3.3V
  • Multiple Language programming

Package Includes

  • 1 x Sensor Hub development board
  • 4 x M2.5x11 + 6 copper rod
  • 8 x M2.5x5 screws and nuts
  • 1 x NTC temperature sensor (waterproof)
  • 1 x Introductions

Mechanical Drawings

SensorhatMech.png
SensorhatMech2.png


How to use

  • Mount it on Raspberry Pi’s GPIO and enable I2C function.
  • Open a terminal and typing :

sudo raspi-config

Navigate to interface options and then select i2c and enable it.


  • Install smbus2 module (python3), please make sure your pi is connecting to internet.
  • Typing this command in the terminal:

sudo pip3 install smbus2

  • Run and test
chmod +x sensorhub.py
./sensorhub.py	


  • C code compile and running (please make sure you have wiringPi library has already installed)
gcc –o sensorhub sensorhub.c –lwiringPi 
./sensorhub


  • You will see the feedback as following picture.
Feedbacksensor.png


Keywords

SensorHub, Docker pi, raspberry pi, humidity, temperature, airpressure, NTC, pir sensor, DHT11, DHT12, light sensor.