EP-0104: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
Line 18: Line 18:
* DockerPi Series
* DockerPi Series
* SMPS
* SMPS
* 12V Input
* 12V DC Input
* Typical output:20W(5V/4A)
* Typical output:20W(5V/4A)
* Absolute output:25W(5V/5A)
* Absolute output:25W(5V/5A)

Revision as of 11:05, 25 July 2019

DockerPi PowerBoard

Powerboard1.jpg

Description

DockerPi PowerBoard is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation.

DockerPi PowerBoard also provides power to other DockerPi modules to protect the security of the power supply. It also provides a safe shutdown function, supports IR remote control switch, button control switch (Requires Driver,One-Step Automated Install).

DockerPi PowerBoard has fan cooling, and we recommend that you install the DockerPi PowerBoard on the bottom of the other DockerPi.

DockerPi PowerBoard recommends 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi. (If other modules require 12V power)

Note: DockerPi PowerBoard does not support hot plug.

Features

  • DockerPi Series
  • SMPS
  • 12V DC Input
  • Typical output:20W(5V/4A)
  • Absolute output:25W(5V/5A)
  • 3CM Quiet Fan
  • Remote Control Safe Power(Require Driver)
  • Button Control Safe Power(Require Driver)
  • Recommended to be stacked at the bottom
  • Can Stack with other Stack board
  • Independent of the mainboard hardware (but Safe Power must develop by yourself)

Official Compatibility Test

Not only support the following development boards, other development boards can be compatible if they have I2C peripherals. (Note: some software changes may be required)

Platform DockerPi Power Notes
Raspberry Pi All Platform Not Include CM Series & EOL Platform
Banana Pi M3 Python 3 & Modify DEVICE_BUS to 2
Orange Pi Zero Python 3 & Modify DEVICE_BUS to 0

Gallery

Powerboard1.jpg
Powerboard2.jpg
Powerboard3.jpg
Powerboard4.jpg
Powerboard5.jpg
Powerboard6.jpg

Package Include

  • 1x Docker Pi PowerBoard
  • 1x Remote controller
  • 1x Instructions
  • 4x M2.5*12 + 6 Copper stick
  • 4x M2.5*6 Nut
  • 4x M2.5*6 Half-round head screw

Power Board Details

Powerboard info.jpg


Mechanical Drawing

Powerboard mech.png


How to assemble

Powerboard7.jpg


One-Step Automated Install(Raspberry Pi)

wget -qO- https://git.io/fj3b9 | sudo bash

Reboot your Raspberry Pi and finish installation.

NOTE:The LED status is incorrect until the drive is installed successfully!

FAQ

  • Q: Can I stack multiple power expansion boards?
 A: No.
  • Q: What are the conditions for 5V 5A?
 A: 12V 3A Input and Good Cooling environment.
  • Q: Can I power other development boards without installing a driver?
 A: Yes,but button and IR function will be disable.
  • Q: What type of power supply is supported?
 A: 12V power adaptor which is positive outside and negative insid
  • Q: Does the 12V power supply need to be purchased separately?
 A: If you don't have a 12V power supply yourself, you need to buy it.
  • Q: Can 12V direct removal also ensure a safe shutdown?
 A: No.

Keywords

  • DockerPi,Power,5V4A,Hat,Stack