D-0009

From 52Pi Wiki
Jump to navigation Jump to search

MAX7219 7-Segment Displays

D 0009 MAX7219 1.jpg

Description

The MAX7219/MAX7221 are compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs. The MAX7221 is compatible with SPI™, QSPI™, and MICROWIRE™, and has slew-rate-limited segment drivers to reduce EMI.
The MAX7219 chipset supports a serial 16-bit register/data buffer which is clocked in on pin DIN every time the clock edge falls, and clocked out on DOUT 16.5 clock cycles later.
This allows multiple devices to be chained together.
The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on.

Features

  • SPI driver
  • Cascadable
  • Supports dimming mode (PWM)
  • Easy to drive
  • Easy to install
  • Digital tube with low power consumption

Specifications

  • 10MHz Serial Interface
  • Individual LED Segment Control
  • Decode/No-Decode Digit Selection
  • 150µA Low-Power Shutdown (Data Retained)
  • Digital and Analog Brightness Control
  • Display Blanked on Power-Up
  • Drive Common-Cathode LED Display
  • Slow-Rate Limited Segment Drivers for Lower EMI (MAX7221)
  • SPI, QSPI, MICROWIRE Serial Interface (MAX7221)
D 0009 MAX7219 6.jpg


Gallery

D 0009 MAX7219 1.jpg
D 0009 MAX7219 2.jpg
D 0009 MAX7219 3.jpg
D 0009 MAX7219 4.jpg
D 0009 MAX7219 5.jpg

Package Includes

  • 4 x MAX7219 7-Segment LED matrix
  • 4 x 5Pin jumper wire
D 0009 MAX7219 0 2.jpg


GettingStart

Keywords

  • Max7219 LED matrix, led matrix, Raspberry Pi 4B