D-0007: Difference between revisions
Jump to navigation
Jump to search
Line 14: | Line 14: | ||
==Gallery== | ==Gallery== | ||
{| | |||
|[[File:TM1637 1.jpg|left|320px]] | |||
|[[File:TM1637 2.jpg|none|320px]] | |||
|[[File:TM1637 3.jpg|none|320px]] | |||
|} | |||
{| | |||
|[[File:TM1637 4.jpg|left|320px]] | |||
|[[File:TM1637 5.jpg|none|320px]] | |||
|[[File:TM1637 6.jpg|none|320px]] | |||
|} | |||
===Application Scenario=== | |||
* Workging with Raspberry Pi 4B | |||
[[File:TM1637 8.jpg|left|500px]] | |||
<br style="clear:both;"> | |||
==Package Includes== | ==Package Includes== | ||
==HOWTO== | ==HOWTO== | ||
==Keywords== | ==Keywords== | ||
* 4Bit 7seg Digital Display Module, 7segment display module, Raspberry Pi 4B | * 4Bit 7seg Digital Display Module, 7segment display module, Raspberry Pi 4B |
Revision as of 16:05, 27 March 2020
4Bit-7Seg Digital Display Module
Descriptions
The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.
Features
- Display of male red for the four digital tube
- Adjustable digital tube 8 gray
- Level control interface for 5V or 3.3V
- 4 M2 screws positioning holes for easy installation
Specifications
- Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
- Digital tube: 4 common anode score points with 0.36 inches LED, red highlights;
- Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;
Gallery
Application Scenario
- Workging with Raspberry Pi 4B
Package Includes
HOWTO
Keywords
- 4Bit 7seg Digital Display Module, 7segment display module, Raspberry Pi 4B