D-0007: Difference between revisions
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
==Features== | ==Features== | ||
* Display of male red for the four digital tube | |||
* Adjustable digital tube 8 gray | |||
* Level control interface for 5V or 3.3V | |||
* 4 M2 screws positioning holes for easy installation | |||
===Specifications=== | |||
* Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin; | |||
* Digital tube: 4 common anode score points with 0.36 inches LED, red highlights; | |||
* Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination; | |||
==Specifications== | ==Specifications== | ||
==Gallery== | ==Gallery== |
Revision as of 15:56, 27 March 2020
4Bit-7Seg Digital Display Module
Descriptions
The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.
Features
- Display of male red for the four digital tube
- Adjustable digital tube 8 gray
- Level control interface for 5V or 3.3V
- 4 M2 screws positioning holes for easy installation
Specifications
- Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
- Digital tube: 4 common anode score points with 0.36 inches LED, red highlights;
- Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;
Specifications
Gallery
Package Includes
HOWTO
Keywords
- 4Bit 7seg Digital Display Module, 7segment display module, Raspberry Pi 4B