From 52Pi Wiki
Jump to navigation Jump to search

Acrylic Set-top box kit for RPi 4B

Jdhxh 11.jpg


This is an upgraded version of a transparent acrylic set-top box kit, which is an improvement on the original set-top box kit.
In addition to leading the miniHDMI of the Raspberry Pi to the back of the panel, it also provides a full-size HDMI interface.
The expansion board will provide a USB interface and a 5V power supply terminal on the front panel to connect other 5V peripherals.
The 4010 blue light fan can dissipate heat well globally, and its quiet characteristics are suitable for living room, horizontal and other areas.

Note: This kit does not include the Raspberry Pi motherboard and power supply and needs to be purchased separately.


  • Easy to assemble
  • Blue light low noise fan
  • Good heat dissipation
  • Small footprint
  • Support full size HDMI interface
  • All interfaces lead to the same side
  • Extended USB interface
  • Extended 5V terminal

Port Definitions

Jdhxh 9.jpg

Extened PCB Board Funciton

Jdhxh 10.jpg


Jdhxh 1.jpg
Jdhxh 2.jpg
Jdhxh 3.jpg
Jdhxh 4.jpg
Jdhxh 5.jpg
Jdhxh 12.jpg

Package Includes

  • 1 x transparent acrylic case
  • 1 x interface transfer PCB board
  • 1 x 4010 transparent blue light fan
  • 4 x M3x16 screws (for fan)
  • 4 x M3 nut (for fan)
  • 2 x M2.5x22 hollow copper pillar
  • 2 x M2.5x25 hollow copper pillar
  • 2 x M2.5x8 copper pillar
  • 4 x M2.5x5 copper pillar
  • 11x M2.5x6 screws
  • 3 x M2.5 screws
  • 1 x Aluminum heat sink kit for RPi 4B
  • 1 x rubber pad
  • 1 x screwdriver
  • 1 x instruction manual
Jdhxh 6.jpg

How to assemble

Jdhxh 7.jpg

Jdhxh 8.jpg

How enable the functions onborad

  • Modify /boot/config.txt file and add following parameters:
dtoverlay=dwc2, dr_mode=host
  • Save it and reboot Raspberry Pi.


  • Acrylic Set-top box for RPi 4B, set-top box, acrylic case, extension pcb board for RPi 4B

Tutorial Video


Please follow the links: