L-0031: Difference between revisions

Revision as of 11:43, 13 January 2020

This is a dual mode wireless NIC module applicable for Jetson Nano, supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2.

1.Remove the two screws on Jetson Nano,detach the Jetson Nano.
2.Connect the extension cable to Wireless-AC8265 on IPEX connector , tighten the nut and washer to each SMA connector
3.Remove the NIC screw onboard, insert the Wireless-AC8265 into the M.2 socket , screw it tightly.
4. Insert the Jetson Nano into the socket and screw it again , connect the antennas

@@ Line 1: / Line 1: @@
-==5DB Wireless NIC & Antena Kit For Jetson Nano==
+==AC8265 Wireless NIC 2.4G/5G WiFi Bluetooth 4.2 for Jetson Nano ==
 ==Description==
+This is a dual mode wireless NIC module applicable for Jetson Nano, supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2.
 ==Features==
-==Specifications==
+* Chip: Intel 8265AC
+* Bands: 2.4GHz / 5GHz
+* Speed: 300Mbps / 867Mbps
+* WiFi protocol: 802.11ac
+* Bluetooth version: 4.2
+* NIC interface: NGFF (M.2)
+* Antenna interface: IPEX connector
+* Supported OS: Linux, Windows 10/8.1/8/7
+* Dimensions: 22mm × 30mm × 2.4mm
 ==Gallery==
 ==Package Includes==
 ==How to Assemble==
+* 1.Remove the two screws on Jetson Nano,detach the Jetson Nano.
+* 2.Connect the extension cable to Wireless-AC8265 on IPEX connector , tighten the nut and washer to each SMA connector
+* 3.Remove the NIC screw onboard, insert the Wireless-AC8265 into the M.2 socket , screw it tightly.
+* 4. Insert the Jetson Nano into the socket and screw it again , connect the antennas
 ==FAQ==
 ==Keywords==