Z-0017: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
Line 65: Line 65:
----
----
==Documents==
==Documents==
How to connect screen and driver board:
*How to setup resolution:
*1. Connect FPC to driver board, and push the grey switch to lock the FPC.
 
[[File:Z006.jpg|thumb|left|300px]]
*How to calibrate touch screen:
<br style="clear:both;">
'''<font color=red>Attention</font>''': Raspbian Image file must be newer than 2016-03-18, it contains touch screen's driver within the kernel, but the old version does not.
*2.Connect
After imaging the TF card and reboot your raspberry Pi, please login system and open a terminal and typing following command to install the calibration software.<br>
<br><code>
sudo apt-get update && sudo apt-get -y install xinput libx11-dev libxext-dev x11proto-input-dev evtest dh-autoreconf libts-bin</code><br>
<br>
And then, you can calibrate as following step:<br>
<br><code>
DISPLAY=:0.0 xinput_calibrator
</code><br><br>
and press enter, you will find there is a calibration pannel on your touch screen like this:
[[File:Calibrating.png|thumb|left|300px]]
<br style="clear:both;" >
You should point at the red cross on your touch screen within 60s to calibrate touch screen. after that, please reboot your Raspberry Pi and have fun.
----
----



Revision as of 17:51, 21 June 2016

7 Inches 1024*600 Raspberry Pi LCD Touch Screen

Touchwire7.jpg


Description

Z003.jpg

Can you imaging that you have a Raspberry Pi or banana Pi, or beagle bone development board, or you just want to make a portable media center. you can use this screen to create your own funny staff, such as making robot's face, making Ironman helmet and so on. you just need a good monitor screen to finish your design. the following one is your best choice.

Screen2.jpg
Screen4.jpg

Feature:

  • Operating voltage: 5V (current requirement 1A-2A), for example car power need to add a 5V regulator
  • Rated power: 6-7W
  • Signal input: 2 AV + VGA + HDMI (HDMI 1.2)
  • Support 5V DC voltage input, you can use USB, or power bank, but the positive and negative can not be reversed, to avoid damage the circuit board
  • Resolution: 1024 * 600,
  • Plug and Play: Support
  • OSD language: Simplified Chinese, Traditional Chinese, English, Japanese, Korean, Spanish, French, German, Italian, Portuguese
  • Control: Multi-function OSD operation or potentiometer adjust the brightness and color
  • Features: Using mature program, clear display
  • Support image flip up and down, the image can conversion 4: 3 / 16: 9 display format

LCD screen parameters:

  • Display size: 7 inch
  • Touch screen: Not support
  • Dimensions: 165 (W) × 100 (H) × 5 (D) mm
  • Viewing area: 154.08 (H) × 85.92 (V)
  • Resolution: 1024 × 3 (RGB) ×600
  • Point distance: 0.05 (W) × 0.15 (H) mm
  • Viewing angle: L70 ° R70 ° U50 ° D60
  • Panel type: TFT
  • Display color: 262K
  • Contrast ratio: 500: 1
  • Brightness: 220cd / m2
  • Interface type: Digital
  • The number of connection: 50 PIN Digital (TTL) TCON
  • Backlight: LED
  • Applications: mobile DVD, digital photo frame, car systems, multimedia applications and other audiovisual systems

How to wire it up?

Screen3.jpg
Touchwire1.jpg
Touchwire2.jpg
Touchwire4.jpg

How to connect screen and driver board:

  • Connect FPC to driver board, and push the grey switch to lock the FPC.
Z006.jpg



Note:

This controller board support Automatically Switch to AV2(Reversing View camera). Please connected ACC to 12V.
The five buttons are as follows: S1 = Power, S2=Menu/Select, S3=Up, S4=Down, S5=Video Source Select


Package Includes:

  • 1xHDMI+VGA+2AV Controller Board
  • 1x7inch 1024*600 Lcd Panel
  • 1x5-button switch and adjustment panel
  • 1x7 inch Touch Screen Kit
  • 1xPower Cable

Documents

  • How to setup resolution:
  • How to calibrate touch screen:

Attention: Raspbian Image file must be newer than 2016-03-18, it contains touch screen's driver within the kernel, but the old version does not. After imaging the TF card and reboot your raspberry Pi, please login system and open a terminal and typing following command to install the calibration software.

sudo apt-get update && sudo apt-get -y install xinput libx11-dev libxext-dev x11proto-input-dev evtest dh-autoreconf libts-bin

And then, you can calibrate as following step:

DISPLAY=:0.0 xinput_calibrator

and press enter, you will find there is a calibration pannel on your touch screen like this:

Calibrating.png


You should point at the red cross on your touch screen within 60s to calibrate touch screen. after that, please reboot your Raspberry Pi and have fun.


FAQ

  • Question:
    • Answer:
  • Question:
    • Answer:

Purchase Links

http://www.52pi.com/