P-0009

From 52Pi Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

5V-4A UK-Standard with switch

P-0009 5V3A英标带开关电源线.jpg

Description

The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 15W continuous output power. The power supply shall meet the RoHS requirements.

Specifications

Input Characteristics

  • Input Voltage & Frequency
Parameters Minimum Rating Maximum
Input Voltage 90Vac 100Vac~240Vac 264Vac
Input Frequency 47Hz 60Hz/50Hz 63Hz
  • Inrush Current (cold start @ 230V AC) No damage for 220V/50Hz at cold start (25℃).
  • Average Efficiency: Standby power <0.1W @ 230VAC/50Hz.
  • Cooling: Natural convection.
  • Mean Time Between Failure(MTBF):The MTBF for the power adapter shall equal or exceed 10,000 hours when operated at full rated load in an

ambient temperature of 25 degree C.

  • Output Characteristics:
RATED OUTPUT Rated Load Remark
Min. Max.
Output Voltage(unload) 4.9V 5.3V
Output Voltage(Full load) 4.9V 5.3V with wire testing
Output Current 0A 3A
Turn - on Delay Time / 3S
Hold-up Time 5mS /
Ripple & Nosic / 150mVp-p
OCP
Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic
capacitor and a 47uF electrolysis capacitor. 

Protection Requirements

  • Over Current Protection:OCP Point Limited: 110%-200% auto restart
The output shall hiccup when the over current applied to the output , and shall be self-recovery when the fault
condition is removed 
  • Short Circuit Protection:
The input power shall decrease when the output is short to GND, the power supply shall not damage, and shall be
self-recovery when the fault condition is removed 

Environment Requirements

  • Operating Temperature and Relative Humidity

0℃ to +40℃ 20%RH to 80%RH @ Sea level shall below or no more than2000M

  • Storage Temperature and Relative Humidity

-30℃ to +70℃ 10%RH to 90%RH(non-condensing)@ Sea level shall below 10000M

  • Vibration

10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z

  • EMC Standards & Safety Standards

EN55032

  • Safety Standards
Type Country Standard
Europe CE EN62368
  • Ielectric Strength(Hi-pot)

Primary to Secondary: 3000Vac / 10mA / 60 seconds (3 seconds for production)

  • Leakage Current

0.25mA max. at 240Vac / 50Hz input

  • Insulation Resistance

100MΩ min. @ primary to secondary add a 500Vdc test voltage

  • Reliability Requirements
    • Burn-in: The power supply shall be burn-in for 2 Hours under normal input and 80% rated load.
  • Testing Equipment
NO. Testing Equipment Model Remark
1 AC Source TDGC-2
2 Power Meter PF9810
3 Electronic Load M9715
4 Oscilloscopes MDO3014
5 Digital Multimeter VC890
6 DC Power IT6721
7 HI-POT Tester LK2627X
8 Cons. T/H Simulator XINBAO

Gallery

Yingbiao2.jpg
Yingbiao3.jpg
Yingbiao4.jpg

Package Includes

  • 1 x 5V-3A UK-Standard power supply

Documentation Downloads

Keywords

  • Power supply, raspberry pi 4B,5v/4A, UK-standard with switch