X6000P SKU:EZ-0052
Jump to navigation
Jump to search
X6000P-7.1CH DIY Kits
Description
X6000P-7.1CH DIY Kits is for the people who want to make a HiFi environment at home, it's fantastic.
For Use With
- Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B
Operating System
- OSMC - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound
- Openelec - 2.0 stereo audio / 5.1 channel surround sound / 7.1 channel surround sound
- Moode Audio Player - 2.0 stereo audio outputs
- Raspbian Jessie - 2.0 stereo audio outputs
- Rune audio - 2.0 stereo audio outputs
- Pi Core Player - To be tested
Key Features
- Ideal for Home Theater Systems
- Ideal for 7.1 channel surround audio systems
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi
- Powers the Raspberry Pi - no additional power supply
- Access to Raspberry Pi GPIO
- Easy DIY with Raspberry Pi
Power Supply Unit
- AC 100 - 240V input ~50 / 60Hz, 5Vdc 4A output
- With 2 snap-in plugs for North America (US) and Europe (EU)
- DC Power Plug Size : 5.5*2.5mm
Specification
Parameters | Value |
---|---|
Power supply: | +5Vdc +/-5% |
Input Ports: | 1 x HDMI |
Output Ports: | 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack |
Analog audio output level: | 2V RMS |
Optical S/PDIF Audio Sampling Rate: | Up to 192 kHz |
HDMI Audio Format: | LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus Dolby TrueHD, and DTS-HD Master Audio |
Optical Audio Format: | LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH |
Size: | 122mm x 90mm x 90mm |
Notes
- For use with original power supply unit only
WARNING:
DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET. Approx 3 seconds delay to turn on Raspberry Pi after power apllied. (The powerful HDMI audio processing chipset needs time to bootup)
Packing List
- X6000-7.1CH Expansion board x 1
- HDMI bridge x 1
- Spacer M2.5 x 20mm x 4
- Screw M2.5 x 6mm x 8
- Power supply (AC 100 - 240V input 5Vdc 4A output W/ EU and US plug /5.5*2.5 DC plug /1.2M cable w/ magnet ring) x1