EZ-0024
Jump to navigation
Jump to search
GPS Module SKU:EZ-0024
Description
This GPS module is based on U-BLOX NEO-6M module, and Module comes with high-performance ceramic antenna , that's means it's integrated active antenna.
Module comes with EEPROM, all the configuration information can be stored in the EEPROM, the module also comes with a rechargeable backup battery ( to support warm start or hot start ,
back-up battery after the main power off , can maintain receiving GPS data for half an hour.
Features
- Using U-BLOX NEO-6M module , compact size , excellent performance.
- Comes with ceramic antenna , strong star search capability .
- Various parameters can be set via the serial port , and can be stored in the EEPROM, easy to use.
- Compatible with 3.3V / 5V level for easy connection to a variety of microprocessor systems.
- Comes with a rechargeable battery back-up , power-down can keep the ephemeris data.
Technical Parameters
| Parameters | Value |
|---|---|
| Power Supply | 3V/5V |
| Model | GPS-NEO-6M-001 |
| Antenna | ceramic antenna |
| Battery | rechargeable battery back-up |
| Signal light | LED light |
| Antenna size | 25*25mm |
| Model size | 25.5mm*31.5mm |
| Mounting Hole | 2mm |
| The default baud rate | 38400 |
| The default output | Compatible with NMEA0183 protocol |
Notice
- Outdoor use
- Note Lightning and waterproof
- Do not support Raspberry Pi 3 B (Because of RPi 3B's serial port problem, it may have other solution)
Package includes:
- 1x GPS module
How to wire up
It can be just wire to your Raspberry Pi B/B+/2B's GPIO Pin, TxD and RxD as following picture:
How to use
Purchase Links
