EP-0111

ICE Tower Cooling Fan Black

• Purchase URL [ https://52pi.com/products/52pi-ice-tower-cpu-cooling-fan-v2-0-for-raspberry-pi-black ]

Description

This ICE Tower Cooling Fan black is burned for solving heat dissipation problem too!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi.
In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
Best of all, this super cooling fan support both Raspberry Pi 3B+ and the new Raspberry Pi 4B.
The fan has 7 different color LEDs that change automatically, making your fan more beautiful and personalized.

Features

• DC 5V Power in (Can be powered by the Raspberry Pi)
• Ice Tower Structure
• 5mm copper tube
• Super heat dissipation
• Rated power 0.4W @5V, 0.08A
• Super Cool fan background light (7 Colors)
• Easy to setup
• Compatible with Raspberry Pi 3B+/4B
• Plug and play

Dimensions

• The Dimensions is the same as ICE Tower CPU Cooling Fan.

Gallery

Raspberry Pi 4B

• It can be compatible with several acrylic case.
• Colorful case, Black & White, All black case.

Raspberry Pi 3B+

How to assemble

• Front view

• Back view

Raspberry Pi 3B+

• 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
• 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
• 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
• 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Raspberry Pi 4B

• 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws
• 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
• 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
• 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Package Include

• 1 x Ice Tower radiator and Fan
• 2 x Steel Mounting brackets
• 8 x M2.5x6 Copper sticks
• 4 x M2.5 Nuts
• 6 x M2.5x4 screws
• 3 x Thermal Tape
• 1 x Screw Driver
• 1 x Protective Acrylic Panel

PS: Product does not contain thermal silicone grease, but if you have thermal silicone the dispassion effect will be better.

FAQ

• Q: Can it be install to my retroflag case?

 A: No, the dimension is too big. 

• Q: How many degrees can be decreased ?

 A: We've tested it at room temperature 25℃, it can decreased about 40℃.

• Q: Does it easy to assemble?

 A: Yes, it is very easy to install, we've provided an instruction for you.