|
|
| (6 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| ==X856==
| |
| [[File:X855 280p2.jpg|right|300px]]
| |
| ==Decription==
| |
| The X856 mSATA SSD Shield expansion board provides a complete storage solution for Raspberry Pi 4 Model B.
| |
| Only mSATA interface SDD hard disk is suitable for X856 mSATA SSD extension board.
| |
| Support up to 2TB mSATA solid-state drive (SSD)
| |
| With this module, user can build a mobile hard disk with a mSATA SSD for Raspberry Pi 4 Model B.
| |
| User can make it a portable NAS storage system.
| |
| Raspberry Pi 4B and mSATA SSD are not contained in this product.
| |
| <pre> NOTE: It is NOT compatible with Raspberry Pi 3B series.</pre>
| |
| ==Features==
| |
| * Ideal storage solution for Raspberry Pi 4 - mSATA SSD Shield
| |
| * Supports up to 1TB mSATA solid-state drive (SSD)
| |
| * Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
| |
| * USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
| |
| * Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)
| |
| * LED red indicator indicates powered status and blue indicator indicates drive status
| |
| * USB bus-powered
| |
| * Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
| |
| * Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X825 assembly
| |
| * Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
| |
| * Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
| |
| * Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
| |
| * Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL)
| |
| ===Power supply===
| |
| * Power supply:
| |
| ** 5Vdc +/-5% , Powered via Pi's USB port or XH2.54 connector
| |
| ** 5Vdc via micro-USB socket, Extra power for SSD
| |
| * Ports & Connectors:
| |
| ** USB socket - USB 3.0 type A x1
| |
| ** 52P Mini PCI-E mSATA slot x1
| |
| * PCB Size 85mm x 56mm
| |
| ==NOTE==
| |
| * A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition
| |
| <font color=red>WARNING:
| |
| Do not power your Raspberry Pi via the Pi's 40-pin header and type-C socket at the same time.</font><br>
| |
| ==Port Definitions==
| |
| [[File:X855 funciton description1.jpg|left|500px]]
| |
| <br style="clear:both;">
| |
| ==Gallery==
| |
|
| |
|
| ==Package Includes==
| |
| * 1 x X856 mSATA SSD shield
| |
| * 1 x USB3.1 jumper
| |
| * 6 x Screw M2.5 *6mm
| |
| * 4 x Spacer M/F M2.5 *12mm
| |
| * 4 x Spacer F/F M2.5 *8mm
| |
| [[File:X855 funciton description1.jpg|left|500px]]
| |
| <br style="clear:both;">
| |
| ==Keywords==
| |
| ==FAQ==
| |
