|
|
| (9 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| ==X825==
| |
| [[File:X825-USB3.1-4B-5.jpg|right|300px]]
| |
| ==Description==
| |
| X825 is Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Storage Expansion Board.<br>
| |
| You can make your own cloud storage or private NAS storage system at your home.<Br>
| |
| The X825 expansion board provides a complete storage solution for newest raspberry pi 4B.<br>
| |
| It supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD).<br>
| |
| Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 Board.<br>
| |
| Upgraded to USB3.1 Gen1 port.<Br>
| |
| <pre> X825 is only fit for Raspberry Pi 4 Model B!</pre>
| |
| ==Features==
| |
| * Easy to assemble
| |
| * OS compatiable: All Raspberry Pi operating systems
| |
| * USB3.1 Gen1 Port
| |
| * Supports upto 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.)
| |
| * Ideal storage solution for Raspberry Pi 4 Model B
| |
| * On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF)
| |
| * Powers the Raspberry Pi via Pi's 40-pin header
| |
| * LED red indicator indicates powered status and blue indicator indicates drive status
| |
| * USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller
| |
| * Quick file transfer with high-speed USB 3.1 connectivity from a PC or a Mac
| |
| * Powers the Raspberry Pi - no additional power supply for RPi 4
| |
|
| |
|
| ==Power Supply Requirement==
| |
| * Power supply: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output
| |
| * DC Power Plug Size : 5.5*2.5mm
| |
| * <span style="color:red;font-weight:bold">Important Note: Please use high quality DC 5V 4A power supply.<br>
| |
| low quality power supply may probably damage your 2.5 inch HDD/SSD.</span>
| |
| ==Gallery==
| |
| * 2.5 inch SATA HDD/SSD Storage Expansion Board
| |
| {|
| |
| |[[ File:X825-USB3.1-4B-5.jpg|left|320px]]
| |
| |[[File:X825-USB3.1-4B-6.jpg|none |320px]]
| |
| |[[File:X825-USB3.1-4B-3.jpg|none|320px]]
| |
| |}
| |
| * With Raspberry Pi 4B and hard disk
| |
| {|
| |
| |[[ File:X825-USB3.1-4B-1.jpg|left|320px]]
| |
| |[[File:X825-USB3.1-4B-2.jpg|none |320px]]
| |
| |[[File:X825-USB3.1-4B-7.jpg|none|320px]]
| |
| |}
| |
| ==Package Include==
| |
| * 1 x X825 V1.2 Expansion Board
| |
| * 1 x USB 3.1 connector
| |
| * 1 x 2 Pin Power Connection Wire(Cable: 12cm/4.72inch)
| |
| * 1 x Mounting screw package
| |
| <font color=red>Note: Not include the raspberry pi and the 2.5" SATA SSD.</font>
| |
| * Mounting holes
| |
| [[File:X825-USB3.1-4B-4.jpg|left|500px]]
| |
| <br style="clear:both;">
| |
| ==Keywords==
| |
| * X825, raspberry pi 4B, HDD, SSD, USB3.1, 2.5 inch ,SATA HDD/SSD Storage Expansion Board
| |
|
| |
| ==FAQ==
| |
| * Q: Don't detect HDD/SDD?
| |
| A: Please try to reboot your Pi first, and then make sure everything is connect well, and please make sure the power supply is working properly.
| |
| open a terminal and typing this command: sudo fdisk -l and then paste the result to our salesmen, they will follow up this case.
| |
|
| |
| * Q: Do i need an external power source supplying for x820 board?
| |
| A:Yes, here is the specification: 5V and 4A with a 5.5mm barrel connector.
| |
|
| |
| * Q: With a hard drive installed, could you eleminate the need for a micro sd card and boot straight from drive?
| |
| A:The Pi4 official has not said it supported, theoretically the hardware is supported, you can try According to :
| |
| [ http://www.raspberrypiwiki.com/index.php/X820#How_to_boot_from_a_USB_Mass_storage_device_on_a_raspberry_pi_3 ]
| |
