EZ-0078: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
(Created page with "==X860 M.2 NGFF SATA SSD Shield== ===Description=== X860 M.2 NGFF SATA SSD Shield * FOR USE WITH <pre>Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+</pre> * OPE...")
 
(Blanked the page)
Tag: Blanking
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
==X860 M.2 NGFF SATA SSD Shield==
===Description===
X860 M.2 NGFF SATA SSD Shield
* FOR USE WITH
<pre>Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+</pre>
* OPERATING SYSTEM
<pre>All Raspberry Pi operating systems</pre>
===Features===
* Ideal storage solution for Raspberry Pi - <span style="color:red;">M.2 NGFF SATA SSD Shield</span>
* Supports up to 2TB m.2 NGFF SSD solid-state drive
* Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
* Supports operating system installation and booting from your SSD
* Supports faster OS image writing (>300Mb/S*) from a PC or a Mac
* Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
* USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
* Quick file transfer with high-speed USB3.0 5Gb/s connectivity  from a PC or a Mac
* USB bus-powered
* LED blue indicator indicates drive status
* Specially-made <span style="color:red;">USB3.0 connector</span> to connect with Raspberry Pi - no additional cables needed
* On-board micro-USB socket and XH2.5 connector allows external power supply to power high capacity SSD (Max 6.6Watts)
* Fully compatible with X720, X730 and X735 for intelligent and safe power management
* PCB Size: 87mm x 56mm
<SPAN style="color:red;">[NOTE]</SPAN>
* USB3.1 Gen 1 port, SSD sequential write speed >300MB/s
* NGFF SATA SSD is not included
* Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
* As with all SSDs, new media must be formatted before use
* Performance depends on host system, workload, and SSD media used
* SSDs use exceptionally high performance storage media that will run hot when under load
* Older SSD drives with less efficient flash media may not perform as well as newer drives
* We only test it on Raspberry pi, not test on the Rock64; But in fact, Rock64 can fully play the performance of USB3 since Rock64 with USB 3.0;


==Power supply request==
5Vdc +/-5% , Powered by Raspberry Pi
'''Additional power supply for SSD (<span style="color:red;">Only when you find that the power supply of the SSD is insufficient</span>)'''
5Vdc via on-board micro-USB or XH2.5 2Pin connector
<span style="color:red;">'''Note:'''</span>''' When use X860 board with X735 Safe Shutdown Power Management & Auto Cooling Expansion Board togehter, the power adapter must be connected to X735 power managment board only, not X860 or Raspberry Pi.
== Ports & Connectors ==
* USB socket - USB 3.0 type A x 1
* Micro-USB SSD power socket x 1
* XH2.54 SSD power input port x 1
* 67Pin M.2 connector P=0.5mm, H3.2mm, Key B x 1
==Package Includes==
* 1 x X860 Board
* 1 x USB3.0 Connector
* 1 x USB 3.0 A-Male to A-Male Data cable
* 4 x Spacer F/F M2.5x8
* 4 x Spacer M/F2.5x12
* 4 x Screw M2.5x6
* 1 x Screwdriver
==Installation Guide==
[[File:X860-installation-guide-970x1720.jpg|none]]
==Document==
How to boot from X860, you can refer to [https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md How to boot from a USB mass storage device on a Raspberry Pi]

Latest revision as of 12:18, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=EZ-0078&oldid=16520"