X105 SKU: EZ-0008: Difference between revisions

From 52Pi Wiki
Jump to navigation Jump to search
No edit summary
(Blanked the page)
Tag: Blanking
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
=X105=
==Product Feature==
{| class="wikitable"
|-
! Feature  !!  Description
|-
| Input Voltage || 6V to 23Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
|-
| VGA output || HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC 
|-
| RS232 serial communication || Control the Raspberry Pi over RS232 or connect to external serial accessories
|-
|USB Storage || Self-powered USB hub with 3 ports
|-
| Real-time clock (RTC) || Based on DS3231SN with included CR2032 battery
|-
|MicroSD Card Reader/Writer || Supports microSD / microSDHC / microSDXC Convenient to write OS image
|-
|Misc ||  Power output socket  Camera flex slot so camera can still be used with the expansion  board attached
-  DIP switch to remove connection from RPi’s pin header
- Directly connected on top of the Raspberry Pi using the board GPIO header pins
- No wiring nor soldering is required
- Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
- Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
|-
| Dimensions || 85 x 56mm (Same size as Raspberry Pi)
|}
----


==Packing List==
*1 x X105 expansion board
*1 x HDMI adapter
*1 x USB adapter
*4 x nylon spacers (M3 x 20mm)
*8 x nylon screws  (M3 x 6mm)
----
==Quick Start Guide==
*A. Fitting the expansion board
*B. Operation system
*C. Power supply
*D. HDMI to VGA converter
*E. RS232 serial communication
*F. Setting RTC time
*G. MicroSD Card Reader/Writer
----
== A. FITTING THE EXPANSION BOARD==
{|-
|[[File:Assembly 275p1.jpg|thumb|left|300px]]
|[[File:Assembly 275p2.jpg|thumb|none|300px]]
|}
{|-
|[[File:Assembly 275p3.jpg|thumb|left|300px]]
|[[File:Assembly 275p4.jpg|thumb|none|300px]]
|}
----
==B. OPERATION SYSTEM==
[[File:Rpi.jpg|thumb|left|300px]]
<br style="clear:both;">
----
==C. POWER SUPPLY==
Xseries expansion board supplies the RPi with a regulated +5V through the GPIO header using a 2A poly-resettable (PTC) fuse. <br>
With the wide voltage input range (6~21Vdc), the RPi can be powered from a wide variety of external sources such as batteries, 12V power adapters, solar battery sources, etc.<br>
<br>
Recommended Power Adapter : 110~240VAC input, 12VDC 2A output <br> 
Dimension of input plug (Unit: mm)<br>
<br>
[[File:Ds0101.jpg|thumb|left|300px]]
<br style="clear:both;">
----
== D. HDMI TO VGA CONVERTER==
<pre>
See description on http://elinux.org/RPi_Screens#RGB_analog.2FVGA
Any HDMI to VGA adapter without external PSU might work for a time, but then burn out D1,
therefore Do not use HDMI converters powered by the HDMI port!
The solution is to either only use externally powered converters.
</pre>
<pre>
Xseries expansion board do not use power from RPi HDMI port and has many features that enable it to perform in a superior manner.
Among those features you will find:
</pre> 
<pre>
Easy to Use: No need of cable and setting
Conversion: It can convert complete HDMI into VGA video
Supports 165MHz/1.65Gbps per channel (6.75Gbps all channel) bandwidth for HDMI Input
Supports Analogue Video output up to UXGA and 1080p with 10-bit DAC
</pre>

Latest revision as of 12:18, 4 August 2026

Retrieved from "https://wiki.52pi.com/index.php?title=X105_SKU:_EZ-0008&oldid=16523"